When the rep comes around at The LumberYard they give you all kinds of sap fi got a box last time.

I’ve never used the concrete adhesive yet it’s always the wood glue.

Thank you Be the Pro and Brittany my box arrived.

Nothing like adult toy! Quality tool.

I used my Bosch planer and grinder today. Never, disappointed!

Yeah not worth it. I thought about that.

I ultimately anchored and glued 4×4’s that I planed down. Shot a laser around then chaulked lines end to end on each side of the timbers.

Took half a day but I’m happy I did it. Things go smoother from there.

If it was in plain I would consider building square rather than leveling everything but it’s 3/4 of an inch out and all over the place. The only other way to do it is to level the corners and cut everything one by one with the string.

So I’m going to have to put some work into planning down the sill plate and I need to buy a new planner in the…[Read more]

So I started this, the contractor who did the slab didnt square the footprint or make an effort to level the form unless he straight edges were not straight and used a 2 ft level…….prick

So Now I shim and plane. Another value to a mortared block curb would be some surface correction ability.

Next time I get a shed inquiry I will note all…[Read more]

I put in a request for the router kit, always heard good things about it

My first thought was a landing then I’m thinking it encroaches the space too much.

What was the deal with the blocks?

Mortar down and epoxy dowels like a typical mudsill?

Just replacing shingles on this.

I built her two story deck all of her windows,doors and siding

Started a roof

I have been trying to get away from these things for years but they keep pulling me back.

When you are the go to guy for all of your customers needs you hate to decline them

Well there is such thing as eaves.

I get the thought process though and I could see that happening I probably have it as well.

I was actually thinking of doing a bottom band of one by with drip edge to protect the siding.

A couple of pieces of boral 4 trim won’t break the budget.

It’s Torch/RubberRoid. It’s about 1/4″ thick. Just don’t bond it.

Nice work Seven Delta.

I have to resist over building a shed and turning it into a cool little house. I have a 3k budget.

I would use strips of APP rubber under those deck sleepers btw.

Good call on the LP stranded, didnt see that option

What to you mean doweling 4×4 block? Just mortar and random anchors?

I have a 13×13 slab and was going to build a 12×12 or 12-6 x 12-6 so I have some edge distance for soil

Interesting. Never see block at least not on Simple sheds

Mostly prefabs here cheaper than I can build often. craned into the yard

One of my favorite purchases in recent years. I find stuff to use it with all the time.

Thats right everybody wants top notch work….:lol:

Redoing a shower would be about a $2k nut. 🙁

No good answer for you other than make sure you dont compromise on your estimates and add wiggle room.

What can go wrong will and it ends up never enough. Im wrapping up a bath where I tiled. It took much longer than my tile sub does. Sadly finding quality subcontract work is becoming a problem…[Read more]