I use Sharpie a lot.
You need gutters.
That’s not going to happen. They just fill up with needles from the trees and things grow in them. Although there is a small section I may do. Besides, I’m not going to be the guy going up that high to clean them.
I also flipped the blades on the planer today while I was cleaning the sho…
JimDaddyO wrote:For 2 windows, the thickness planer fills up a big tote with shavings. That doesn’t include the dust from the table saw, mitre saw, router, or the shavings I make at the bench.
Each sill has a kerf in the underside so water running down the side of it will fall off before it creeps under the sill to the wall.
Photos of all 5 w…
pkorab wrote:I just had this happen to me. I am a professional Woodworker / Carpenter of some 40 years with very few incidents and no serious accidents. I had just finished a cut on my Bosch Table Saw with no problems but I must have caught the spinning blade when pulling the push stick away and it exploded, leaving a hole in my hand and shrapnel…
roninohio wrote:lumber is really high now. I was at menards and a reg 8′ 2×4 was $12 !
Same price here.
Miamicuse wrote:good and subjective blade review
When I hear/read those 2 words one next to each other – “good and subjective”- I cover my wallet pocket and walk way. Something it is very fishy.
Boschmanbrian wrote:they shut down the bigger of the two bridges here , traffic has been terrible ,
Traffic will be so bad in your neck of the woods that you’d wish you had a job that required home working.
JimDaddyO wrote:I would have used the house as the reference face and to heck with plumb
That’s what I do with most of the windows.
Taller ones, crank operated are more difficult to adjust so they have to be plumb or vey close to plumb. 3/4″ would be a big difference.
Can’t tell you what to do. For 1 window, maybe. But 13 ?!?! That’s a lot of work.
Sorin replied to the topic Today … I bought a Bosch – V4 in the forum Power Tools, Pneumatic Tools, Hand Tools and All Things Tools 5 months, 2 weeks ago
Very cool trick.
Can’t use it because I have no dead battery but it’s good to remember it.
Sorin replied to the topic Tool RANT of the Day….Aaaargh! V2 in the forum Power Tools, Pneumatic Tools, Hand Tools and All Things Tools 5 months, 3 weeks ago
Doobie wrote:when I bought my first OMT at a woodworking show nearly 20 years ago
I think a Fein OMT was close to $500 back then.
Lots of money.
theamcguy wrote:They’re finally here – Eagle Grip locking pliers, made in the USA!!
I have a bunch of them in my shop. Different shapes and brands.
I made the mistake to look for a price and now I can’t stop the hiccups and stutterings.
Definitely not for me those eagle thingies.
Seven-Delta-FortyOne wrote:Jesus made and drank wine. He didn’t get high.
Maybe he got drunk from that wine 😀 You wouldn’t know.
Drunkenness last a lot longer than getting high out of weed.
We can go on until you manage to get me excommunicated 😀
Seven-Delta-FortyOne wrote:Don’t like drugs, drug users, or drug producers.
Matters nothing to me if it’s “legal” or not.
I don’t like what it has done, and is currently doing, to my community.
Unfortunately, we’ve traded the timber industry for the cannabis industry.
I see alcohol worse than weed.
Seven-Delta-FortyOne wrote:Cannabis is booming here, unfortunately
email@example.com wrote:I have been on calls indicating that exterior doors and appliances are in short supply due to the Freeze in Texas and a shortage of the insulation compounds that they inject into them.
Same problem her.
I think that’s a goose not a duck.
Oops yes I believe you are right , it’s also called a loon I think
And after work , while I was backing up into the driveway , I took my time because of the rabbit , it was just walking across the driveway , right into the neighbors backyard , then when I went outside to…
- Load More