fishguy3 wrote:Ryan F, yes that was my plan. I tried to get the linoleum up when I did the kitchen floor and it was impossible. I put hardwood in my kitchen and I ended up going right over it.
The official answer would be to remove it and start over. Thats said, if it’s that difficult to get off, it’s probably ok to leave it.
I’d highly…[Read more]
I dont do this stuff on my jobs, but this is for my house so Im going to try to tackle it myself. Mostly out of my element here.
Anyway, going to add a half bath off the kitchen directly above. Ive got a nice drain stack already. Toilet will practically be directly above. You can see in the pic the drain entering from the washer. Upper…[Read more]
Could you put temporary extensions in that would support a track on the outside? Most track saws let you cut close so you really just need something to support the rails. Can you build a floating support for the rail?
I was thinking something like that, clamp some sort of temporary support for the…
That’s a lot of corrosion.
It needs to be pulled. Not sure what your relationship is to this business, but it if were me, i wouldnt touch it. Whoever makes these kind of decisions should be informed that a licensed plumber is needed.
Dbeltramini wrote:Hi All,
I am new to the forum….trying to find out how to attach 2 27mm dia vacuum hoses to each other to make a longer hose…I cannot find any threaded hose couplers that are not reducers in the size I am looking for. Anyone have any suggestions?
Ryan replied to the topic heavy loaded truck drove in new driveway in 24 hours after pouring in the forum Concrete/Masonry 6 months, 2 weeks ago
liandhan wrote:Hello everyone, Thank you for your concern. I’m sorry I didn’t check the forum because I’m so busy for moving. A manager of the home builder ( one of largest national home builder) met me before closing and he told me they wouldn’t extend the warrantee and also no compensation because he thought the driveway was good. Please let me…
1/4″ is plenty. All youre looking to do is eliminate a reservoir that would collect if it sloped BACKWARDS and had nowhere to go against the metal frame, caulk joint, and ledge intersection.
Unless you have some extra redguard (or similar liquid membrane) lying around, i wouldnt be too concerned with it. In that area, the water youre getting is…[Read more]
Yes, leave the existing. It looks to me like you have enough frame to butt a typical 3/4″ threshold with room to spare, height-wise. Then caulk the gap.
Once you silicone every change of plane around a continuous piece of marble, especially sloped inward, i wouldnt be concerned about it. By the book? No. Good enough for your objective now?…[Read more]
What youre proposing will work to stop the damage there. Obviously not ideal, but ideal went out the window a long time ago on that shower.
Like you said, get a continuous piece of marble, and make sure you get a decent pitch on it. Obviously caulk thoroughly around every edge of the marble
Id be inclined to leave the glass. It’s less work,…[Read more]
I would just go through the wall. It isnt beyond your skills. Do you have any sds rotary hammers? Even a Plus is fine for a one-off.
I don’t, but it wouldn’t be an expensive rental.
Multiple holes and chisel the waste to make the one bigger hole?
If youre renting, may as well just get whatever siz…[Read more]
Ryan replied to the topic heavy loaded truck drove in new driveway in 24 hours after pouring in the forum Concrete/Masonry 7 months, 3 weeks ago
How damaged is it? As you said, “definitely damaged.”
1. Remove damaged driveway
2. Pour new driveway
4. Dont let anyone drive on it for 7 days*
Is this floodlight IP rated?
not the current model (GLI 18V-1900N – non bluetooth), but the next model will be “GLI 18V-1900C” -> IP64
Hey Alex, thanks for info! By the way IP64 means what?
I might get one If I can use it in humid and dusty places like when I do in…
hojo04 wrote:what not with a electric sander lol? I figured it would be done by hand.
An electric sander could certainly be used, yes. But thats out of your scope. You definitely dont want a sanding block, unless you want to turn the molding into flat stock.
Go to Sherwin Willians and get some 3m sanding pads, both medium and fine. Get a…[Read more]
I don’t understand why they don’t make an LB-5 sized unit. Tanos/Systainer does, why not one for the L-Boxx line? They all come from the same company.
They’re not from the same company. The Sys5 is taller, but the L4 has more volume.
I just found out recently that both…
- Load More