-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 2 months ago
Doobie wrote:
I step into this thread occasionally…..what is happening here?Is EGO simply going to a new distribution channel teething issue, or is it that the EGO brand is imploding?
Honestly I’m not sure anymore , it started this summer with the split between HD and Ego , but Lowe’s picked them up , and…
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 2 months ago
Boschmanbrian wrote:Well , I just received a call from Reno Depot , they told me that my order is going to be cancelled , they said Ego said they can’t supply them , because of a defect 😭 so much for that
I’ve been in contact with Ego through the IG site , hopefully they can give me better information.
Please let me know if you find out wha…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 2 months, 2 weeks ago
Boschmanbrian wrote:Just saw this on the igocordless site , that is not good , I’ll have to contact Reno Depot to see what’s up with my order , hopefully I will have one of the blowers that was ordered before this , I wonder why , could it be because of the covid19 and backlog , or is something up with Ego manufacturing /company
Looks like it’…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months ago
redwood wrote:I agree Eric, about the quality of their products, so far. I have everything you have minus the blower plus the chain saws and rototiller.
They are not cheap though and we shouldn’t have to go through hoops to get things fixed. Down the road, if something goes wrong, at least in my area, no one fixes them. So your option are t…
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months ago
montreal_woodworks wrote:
I have NOT been impressed with Ego customer service, but their products – in my experience – have been fantasticI have the first gen mower as well as this year’s new one (gave my father the older model)
I have the leaf blower, the hedge trimmer, and the lawn trimmer.
I have the Crappy 100w Nexus…
-
Eric replied to the topic Dyson or Shark Vacuum cleaner in the forum Cordless Vacuums 3 months ago
Cpytox8 wrote:I am fed up with my Dyson V6 Absolute and I think it has no suction and useless now , the v11 is £600 an I am not willing to spend that.
Went to Currys yesterday and they recommended me shark Vacuum cleaner.
Anyone think sharks are better than Dyson?
Thanks
Got a v10 last year. Its ok. But the battery doesn’t last all that…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months ago
I have NOT been impressed with Ego customer service, but their products – in my experience – have been fantastic
I have the first gen mower as well as this year’s new one (gave my father the older model)
I have the leaf blower, the hedge trimmer, and the lawn trimmer.
I have the Crappy 100w Nexus Escape (ok, I regret getting that one)
I have the…[Read more] -
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months, 4 weeks ago
redwood wrote:
That’s good to know about the Traeger, I have a Pit Boss pellet BBQ, I should have checked that for power consumption. I imagine it would be really close to the stove. The stove may have a additional blower, that wouldn’t use much energy.What AH batteries are you using?
I hav…
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months, 4 weeks ago
redwood wrote:That’s good to know about the Traeger, I have a Pit Boss pellet BBQ, I should have checked that for power consumption. I imagine it would be really close to the stove. The stove may have a additional blower, that wouldn’t use much energy.
What AH batteries are you using?
I have eight of the 7.5ah
Nice to keep four on fast cha…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 3 months, 4 weeks ago
redwood wrote:I’m am now seriously considering the Nexus 3000. Just waiting to run my new pellet stove (it’s been too warm) and seeing how much wattage it uses and how long the Nexus would power it. It would help out so that I don’t have to run my gas generator so much. As well as go out first thing in the morning and having to starting the g…
-
Eric replied to the topic Recommend an appliance brand? in the forum All Other Trades 4 months, 1 week ago
jufers3 wrote:The problem comes with me is whenever I try to find and buy best home appliances for my home, I usually go and check review. Even after positive reviews of several products I often get wrong product. I don’t know why it happens but I one thing I learned is always try to buy some good reputated brand products, but they cost, and I a…
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 4 months, 3 weeks ago
Miamicuse wrote:The ego 56v batteries are quite big in size.
Thats because they have massive capacity
At the end of the day, amp hours and volts don’t really matter as much as watts do – volts and amps are essentially how you manage to “get there” while the wattage is what you can do with it.
An 18v (let’s ignore peak vs run voltage for this)…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 4 months, 4 weeks ago
redwood wrote:My Generac generator is a portable, fuel injected model. I got it onsale at Costco for $800 US, a couple of years ago. Other then the week it was onsale, I’ve never seen it below $1000 US.
Only other costs were to install a 220V receptacle and make up a short heavy cord.
My setup is bootlegged and definitely not up to a…
-
Eric replied to the topic Looking to get a Pressure Washer in the forum Brand and Manufacturer Discussion 4 months, 4 weeks ago
Doobie wrote:I don’t like using a PW on cars to clean dirt off. If I have one out anyways near the car and decided to wash down the car, it’s just to wet it and rinse. Dirt removal is still done by hand with soap with one of those wooly hand/mitt washers.
I’m somewhere in between
My pressure washer is mostly for my deck and front stairs, but…[Read more]
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 5 months ago
Boschmanbrian wrote:The bummer about Ego though is , it’s not sold at Home Depot anymore , and Lowe’s is farther away for me , guess it’s going to have to be online orders from now on
That’s funny about the peanut oil
Check out igocordless.ca
They also sell Ego stuff
-
Eric replied to the topic Looking to get a Pressure Washer in the forum Brand and Manufacturer Discussion 5 months ago
montreal_woodworks wrote:
I had two Karchers (K3, I think) that both died in less than a season. I then moved on to Bosch Green. I went through four with each failing before the first day was done. All were returnedIm now on a “pro” electric Sun Joe. Got it in the spring and have used it probably a dozen times so far. No com…
-
Eric replied to the topic EGO in the forum Brand and Manufacturer Discussion 5 months ago
redwood wrote:It’s probably easier to cut larger limbs, then a trunk with the pole saw, but the EGO pole saw seems to have as much power as the 16″ EGO chainsaw. The biggest issue I see with a lot of cordless chainsaws is that the chains are thinner and you need to really square up the cut or things happen (chain comes off).
There is a good rea…
-
Eric replied to the topic Looking to get a Pressure Washer in the forum Brand and Manufacturer Discussion 5 months ago
I had two Karchers (K3, I think) that both died in less than a season. I then moved on to Bosch Green. I went through four with each failing before the first day was done. All were returned
Im now on a “pro” electric Sun Joe. Got it in the spring and have used it probably a dozen times so far. No complaints
Not that my limited use is high…[Read more]
-
Eric replied to the topic IKEA cabinets in the forum Woodworking/Carpentry 5 months ago
We are looking into buying a cottage up north at some point, and noticed we hate every kitchen we have seen so far.
In every case, an Ikea kitchen install would take next to no time, cost less than all other options, and look great. It would also last for at least 20 years, and is modular enough that individual parts can be swapped out for a…[Read more]
-
Eric replied to the topic IKEA cabinets in the forum Woodworking/Carpentry 5 months, 1 week ago
montreal_woodworks wrote:
Hey guysLong time no see
Eric! Nice to hear from you. Big welcome back!
montreal_woodworks wrote:
In my garage/woodworking shop, I wanted to put in wall to wall cabinets for my tools – Ikea was faster and cheaper than the wood to build my own, and the fit just happened to work out to within half an i… - Load More