Mx30 fit nicely in the lboxx2
Looks like Bosch is releasing some new inserts.
Any idea when these inserts will be available?
Bosch 1250DEVS 6″ Dual-Mode Random Orbit Sander/Polisher Insert Bosch 1600A002VR
Bosch 3727DEVS 6″ Random Orbit Sander/Polisher Insert Bosch 1600A002VV
Bosch CSM180 5 3/8″ Metal…
RonW wrote:I got a box today.
Thanks Bosch, BTP and Jim.
It’s a lot bigger than I thought it would be. That’s not a bad thing. Just didn’t expect it to be this big.
congrats on your new light. it’s a good one for sure
Masterbosch wrote:Mx30 fit nicely in the lboxx2
Your hard molded case has seen its days, that’s for sure. The lboxx insert came right in time 😛
I have the mx30 also with an insert in the lboxx2. I posted it here too a while ago….but here again 😛
I got my order from germany…..
Holy moly! You went to town there Ebrahem. Nice imported haul. I really like those totes with the fold down handles. Can you stack and latch regular L-boxxes on top of them as well?
Yes Kevin they do. It’s actually just an adapter which attaches to regular lboxx’s to t…[Read more]
Clev08 wrote:Got this a couple days ago, really like not needing a compressor!
congrats on your new cordless brad nailer. I believe austin has some milwaukee cordless nailer too
Masterbosch wrote:I put the ros20 and colt router in lboxx 3 . Colt doesn’t fit on lboxx2.
Very nice Ebrahem. nice to see them in lboxx’s.
You are correct, both inserts are designed for the lboxx3.
Masterbosch wrote:I got my order from germany has the new grinder some inserts and dremel. I turn the lbox3 open tops to lboxx4 open top.i got 2 hook for the framing guns since they don’t come with one. Got a insert for sgh182 and na55 attachment. Mr23 also got into lboxx. Mx30 is also going intok lboxx. I’m gonna use the open tops for tile tro…
madman_us wrote:Hey Jim @bethepro
I just looked thru the filter for the VAC models and somehow the Bosch VB090R doesn’t show up anymore – Reusable Fleece Filter Bag for use with VAC090 Dust Extractor, 9-Gallon.
Are they discontinued because they don’t sell well, or will we see a new/upgraded reusable bag, or is there another reason for it?…
JimDaddyO wrote:I have the 1250DEVS on my radar, but that is not a sure thing. Perhaps by the time I get the points the new Colt will be out and available. Or, maybe something else will cross my mind. I am trying to resist looking at the redemption page.
great taste you got there JDO. I only hear good things about this sander.
It’s on my list as well.
jponto07 wrote:I started a deck job today…did all of the demo before noon! Tomorrow morning, I will set up a few string lines and mark pier locations and dig the holes.
very nice Jon. looking forward to more pictures of the progress when you get a chance 😛
Will it be a larger deck or why are you removing it?
Boschmanbrian wrote:Definitely make good cordless tools, the guys in the plant services department all use them, it’s been around 2 years, still holding up good.
First I thought after seeing your picture, is that a special edition from the Makita but then I saw it’s only dirt haha.
Makita makes great tools but personaly I don’t own any (yet)
Alex replied to the topic The official 2017 new bosch tool thread in the forum Power Tools, Pneumatic Tools, Hand Tools and All Things Tools 1 day, 22 hours ago
theamcguy wrote:Looks like a decent blower form the video. Wonder what the specs are?
enclosed you’ll find the specs.
the blower probably comes in handy for small job clean ups, cleaning off tools, or blowing out holes after drilling.
Masterbosch wrote:madman_us not yet I’m gonna use the new blade on the backsplash. It’s marble but glass blade should cut it more smoother since there is a design I need clean cuts.
Got it, very nice! looking forward to those cuts and their quality with the new blade
Boschmanbrian wrote:I spent a few hours at the horse ranch yesterday afternoon,
Very relaxing place for me.
Also my friend is going to be building an arena on his ranch, asked if I could be available to help out.
I think it might be possible,
That looks like a nice place to relax. It’s always to help out a friend.
cmeyer25 wrote:I’d get that GSR 12V-15 FC Drill Driver myself!
but it probably takes a few month to get to NA and then it’s questionable if it will hit the rewards list.
Alex replied to the topic The official 2017 new bosch tool thread in the forum Power Tools, Pneumatic Tools, Hand Tools and All Things Tools 2 days, 16 hours ago
I see it on acmetools afvertising.looks like bosch is gonna bring the 18v blower into north america. Looks like bosch is really trying to push new tools into north american market. That blower is well over due. I wish they had better advertising for there core…
- Load More