Sorpa wrote:

Boschmanbrian wrote:

Sorpa wrote:
I was looking for an arbour press for a good while and I eyed a 1 tonne Palmgren for around $120+ tax. Still thinking at that Palmgren because it’s coming with some dies.

What sort of dies, and sizes you looking for?

The usual stuff for starters: for setting rivets, flare some short brass or a…

[Read more]

smallerstick wrote:

Boschmanbrian wrote:

smallerstick wrote:
Table is in place and leveled. It just needs a light sanding on the base and some BLO. I very seldom use sheet goods so a wide ripping table is not really necessary. I can benefit from some added floor space, though and the extra vise will come in handy.

Jumping Jesus, that’s b…

[Read more]

PI_Woodworker wrote:

Boschmanbrian wrote:
tarting the 4th week of picketing,
Not sure what to expect anymore
Looking forward to seeing this over
After picketing this morning, I’ll be going home and jumping in the pool

I sure hope this gets resolved quick for your sake Brian. No fun I am sure.

Thanks Lon, I sure hope so also.

@JimDaddyO lol…[Read more]

theamcguy wrote:Here’s a review on the new 18V radio

https://toolguyd.com/ridgid-18v-gen5x-charging-radio-r84085b/

Looks like a decent radio,

theamcguy wrote:Wow here’s a sweet deal Bosch is sponsoring the ToolGuyd to build the Ultimate 12V tool center. First installment here.

https://toolguyd.com/what-should-the-ultimate-bosch-12v-compact-cordless-power-tool-station-include/

That sounds pretty cool, I didn’t see any thing about the 12 volt plane,
Looking forward to seeing w…[Read more]

smallerstick wrote:Table is in place and leveled. It just needs a light sanding on the base and some BLO. I very seldom use sheet goods so a wide ripping table is not really necessary. I can benefit from some added floor space, though and the extra vise will come in handy.

Jumping Jesus, that’s beautiful, it’s nicer than my kitchen table,…[Read more]

PI_Woodworker wrote:Got some roundover bits and a couple of very large forstner bits. 1 @ 3 1/4″ and the other at 3 1/2″. Going to cut a hole in the couch side table top I made so it will allow a pop can in a huggie fit through. I built a under-table on the base to keep it from falling through.

Congratulations Lon, that sounds like it sho…[Read more]

Starting the 4th week of picketing,
Not sure what to expect anymore
Looking forward to seeing this over

After picketing this morning, I’ll be going home and jumping in the pool

Hot and humid lol
Already around 28 and very warm, nice and sunny, the odd cloud once and awhile,
Supposed to be well over 32 today,

TopNotch wrote:Good point on grit sifting through the foam joints.
I like the carpet runner idea although it’s limiting.

I keep a moving blanket in the trucks for quick protection. Can’t beat it for $5 at harbor freight

Definitely inexpensive and decent protection, the only thing is its slippery at times,
I’m going to try to buy a few of tho…[Read more]

brianpeters wrote:Installed some crown molding in this kitchen for a friend of mine, his builder didn’t quite finish. Had a real head scratcher, I don’t do crown a lot, and had a weird scenario to figure out. The cabinet sticks out from the angled wall an inch or so, made for a short jog in the crown. I’ll try to get a finished pic when I’m done.[Read more]

Doobie wrote:

Boschmanbrian wrote:

kurt@welkerhomes.com wrote:
I got the same box the other day, finally got a chance to get into it. Looking forward to checking it out. I also ordered a L3. I thought I ordered a L2 also, I need to see what they deducted for points to see of I should have gotten that also.

Congratulations Kurt, looking…

[Read more]

kurt@welkerhomes.com wrote:This week we installed 6 large hanging basketball hoops. The hoops have motorized height adusters and large glass backboards. They are quite heavy to put in place. A while back I made a bracket for a ductwork lift to set backboards when we replace them. It is a manual crank model and sometines as the lift extends,…

[Read more]

JimDaddyO wrote:If you are thinking about the GLI18V 1900N light this might interest you. The thing lights up almost my whole yard at night. Cool light.

<figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/A7omkYgiHVM?feature=oembed&wmode=opaque” frameborder=”0″ allow=”autoplay; encrypted-media”…

[Read more]

roninohio wrote:

cmeyer25 wrote:

roninohio wrote:

cmeyer25 wrote:
I had two does and three fawns just mosey on through our campus today. One of the does was limping though.

Looks like they are pretty used to people. Love to watch them.

They’re real tame up here. They’re a pest though – they’re so bold they’ll hang out in people’s yards munch…

[Read more]

Sorpa wrote:I was looking for an arbour press for a good while and I eyed a 1 tonne Palmgren for around $120+ tax. Still thinking at that Palmgren because it’s coming with some dies.

What sort of dies, and sizes you looking for?

cmeyer25 wrote:I’m on vacation so the only Bosch tool I’ll be using the next few days will likely be just my blower, on the air mattresses and pool floaties.

Great use for that, I bet you also brought a charger and the power adapter for charging cell phones

madman_us wrote:

Doobie wrote:

madman_us wrote:

Doobie wrote:

DirtyWhiteBoy wrote:

Doobie wrote:
Just received my VAC140A today

Isn’t that the VAC140AH?

Sorry, typo mistake. I don’t believe it has a Hepa filter in it though. I think it is just Hepa ready.

It does come with a hepa filter installed. It has the new VF130H filter ins…

[Read more]

kurt@welkerhomes.com wrote:I got the same box the other day, finally got a chance to get into it. Looking forward to checking it out. I also ordered a L3. I thought I ordered a L2 also, I need to see what they deducted for points to see of I should have gotten that also.

Congratulations Kurt, looking forward to hearing and seeing what you…[Read more]

24 and sunny at 8 already, Suppose to be a beautiful hot sunny day
Should be around 30 and sunny, but humid,