We are doing our HVAV vents in toe kicks routing grooves instead of using a metal grate. I have posted pics of a few. After seeing @asevereid do his horizontal I knew that is how we would start doing ours. I have always done the layout on site and made a quick, rough jig to complete the task.

I had some time today and decided it was time to make…[Read more]

Today we spent some time in shop office in the morning. Then went to the cottage reno. Installed some roof vents for the bath fan and range hood exhaust. Finished up some misc wiring. Installed this toe kick. I did the vent cut out at the shop last night. Thanks @asevereid for the horizontal idea. I like this way much better than vertical.

Then…[Read more]

Some good mods being discussed. @thedude306 the side slot is something I have thought about before and just haven’t tried. I never thought about an angle before…I like that. Honestly I only have a short rail and a long rail and the only time I have ever connected them has been in the field doing site mods to a floor or large cabinet.

How often…[Read more]

@asevereid great looking cabinets and stone work also, looking good.

MaukaRunner wrote:Man, you missed a lot. The whole BryanT/Sergay Bucket Jockey Pink Cat fiasco. Might have been good that you missed all of that.

Hey come on Eric I’m not that bad !!! oh BryanT lol

@asevereid welcome back , good to see you have been busy, looking forward to hearing from you more.

What?? Man I missed that whole ordeal too…must have been taken care of quickly by our mods. Glad to see you around again @asevereid!

Welcome back @asevereid and @cranbrook2!

Skillman wrote:

utopia78 wrote:
Nothing wrong with being busy. Nice to see you drop back in and say hello. I can say that the 7-1/4 in. Magnesium SKILSAW® SIDEWINDER™ with Diablo® Carbide Blade was added to the list.

Welcome back @asevereid Hopefully @utopia78 mine comes in the mail soon . Been some misshapes with shipments .

Sorry to hea…[Read more]

utopia78 wrote:Nothing wrong with being busy. Nice to see you drop back in and say hello. I can say that the 7-1/4 in. Magnesium SKILSAW® SIDEWINDER™ with Diablo® Carbide Blade was added to the list.

Welcome back @asevereid Hopefully @utopia78 mine comes in the mail soon . Been some misshapes with shipments .

redwood wrote:

asevereid wrote:
Nope. But there’s a story behind that…

Stay tuned!

@asevereid
We are still tuned in and waiting.

RedWood where your popcorn??
I’m waiting too.

asevereid wrote:Nope. But there’s a story behind that…

Stay tuned!

@asevereid
We are still tuned in and waiting.

58Chev wrote:When people give me scraps of wood, most times it ends up in my fire pit. Got a brother in law who works at a specialty wood shop and will give me the scraps.

@asevereid, Can’t wait to see some finished products that you make with the scraps. Just noticed you are in BC, there must be some mills around that you can muster up some s…

[Read more]

When people give me scraps of wood, most times it ends up in my fire pit. Got a brother in law who works at a specialty wood shop and will give me the scraps.

@asevereid, Can’t wait to see some finished products that you make with the scraps. Just noticed you are in BC, there must be some mills around that you can muster up some scraps for nothing?

@asevereid wow looks great, thanks for the update. Like the trim work and color choices.
Nice shower, I like the rain heads.

asevereid wrote:Finally got another setup.
I wasn’t happy at first because the stand was so tall, but I cut the legs down today to match my saw horse height because I’ll be working with some decking tomorrow. So now I have as much support as I need. Now I can focus on making some extensions.

Looks like a really portable setup. Will you need to…[Read more]

svensshutters wrote:There track saw was also rated in some reviews as a lower end tool compaired to the others if I recall correctly. So you haven’t gotten any customer service for your horse yet huh?

Adam, @asevereid bought the Triton Track saw a while back, but he has been silent on it.

DirtyWhiteBoy wrote:

asevereid wrote:
I had to rig up a table for cutting and just went with half lapped 2x’s and saw horses.

Well that looks fast and easy. I like fast and easy. What kind of track saw is that?? It looks orange.

I was wondering the same thing – is that the Triton track saw? @asevereid

Sparky603 wrote:UPS guy showed up after supper, with my new Ergodyne canvas utility buckets.

Nice bag lol.
No really they look well made, and practical, I assume you will be using them for your work / electric.

@RonW, congratulations nice little stash,

@asevereid, I heard good things about that little compressor, they don’t make…[Read more]

theamcguy wrote:

whitehill wrote:
We were having a good laugh recently at an audio diy get together, about the prominence of the “Maker” movement in the media lately.

True, people used to do all the time. Remember the articles in magazines like Popular Mechanics? They had a bunch of how to stuff using common household items.

@asevereid, th…[Read more]

@asevereid I am not to knowledgeable on lasers , but is their any thing that would be good from the list here ?