dcsimg

Woodworking Videos Part III

Viewing 20 posts - 1 through 20 (of 948 total)
  • Author
    Posts
  • #681534
    ChadM
    Moderator
    East Palestine, Ohio

    We broke the thread again…here is the link to the old one. https://bethepro.com/forums/topic/woodworking-videos-part-ii/

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

    #681738
    smallerstick
    Pro
    North Bay, ON

    Nice little project to start the new thread..

    I like his approach and good use of mixed materials.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #681741
    theamcguy
    Pro
    Fayetteville, NC

    Nice little project to start the new thread..

    It sure is, Thank you for posting.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #681939

    I have bene catching up on pretty much all of several years worth of Frank Howarth videos, anyone else have an y luck with finding and refurbishing old big machinery? I really like some of Frank’s big old gear:

    Will

    #681953
    smallerstick
    Pro
    North Bay, ON

    Frank does some really good refurbs and some really neat projects but my favourite old machinery guy has to be Jack. His is one of the best working woodworking shops I have seen. No frills, no nonsense, great machines.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #682104
    smallerstick
    Pro
    North Bay, ON

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #682580
    smallerstick
    Pro
    North Bay, ON

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #682608

    Frank does some really good refurbs and some really neat projects but my favourite old machinery guy has to be Jack. His is one of the best working woodworking shops I have seen. No frills, no nonsense, great machines.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/NP1nATcKTsg?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=”” allow=”autoplay; encrypted-media”></iframe></figure>

    Very true Jacks’ Wadkin temple is hard to believe.

    Will

    #682723
    smallerstick
    Pro
    North Bay, ON

    These guys always amaze me…

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #682729
    Doobie
    Moderator

    These guys always amaze me…

    Never seen a CNC like that before. Pretty wicked. But all that hand sanding….must have taken him hours and hours to do all those wave ripples. There must he an easier way to sand all that.

    #682745
    smallerstick
    Pro
    North Bay, ON

    These guys always amaze me…

    Never seen a CNC like that before. Pretty wicked. But all that hand sanding….must have taken him hours and hours to do all those wave ripples. There must he an easier way to sand all that.

    Industrial robots. They are all over assembly operations in automotive plants. They fasten, cut, finish, weld and much more. If you have ever toured the Oshawa Assembly Plant just down the road from you, there are hundreds of them in use.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #683119
    smallerstick
    Pro
    North Bay, ON

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #683265
    smallerstick
    Pro
    North Bay, ON

    Looks like a cheap, east way to link a vacuum to a power tool.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #683287

    Looks like a cheap, east way to link a vacuum to a power tool.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/fHm6ikPPrVA?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=”” allow=”autoplay; encrypted-media”></iframe></figure>

    Nice if I ever decide to dedicate a cheap vac to my miter saw I will definitely build one of these.

    Will

    #683503
    smallerstick
    Pro
    North Bay, ON

    Some really useful information lol

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #683602
    GTokley
    Pro
    Madoc, ON

    Greg
    Do More of What Makes You Happy

    #683765
    smallerstick
    Pro
    North Bay, ON

    We all need clamp storage and, as soon as we build something, we get more clamps. Here’s a flexible system to adapt to changing needs.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #683786
    Doobie
    Moderator

    Some really useful information lol

    That was cute. Lol!

    #683854
    GTokley
    Pro
    Madoc, ON

    We all need clamp storage and, as soon as we build something, we get more clamps. Here’s a flexible system to adapt to changing needs.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/X_gCLLbzZKw?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allow=”autoplay; encrypted-media” allowfullscreen=””></iframe></figure>

    That’s not a bad idea. You are right we all need clamp storage.

    Greg
    Do More of What Makes You Happy

    #684430
    smallerstick
    Pro
    North Bay, ON

    Nice project and an entertaining video, too.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

Viewing 20 posts - 1 through 20 (of 948 total)
  • You must be logged in to reply to this topic.
queries. 1.353 seconds