dcsimg

What are you saving up for? Version 9

Viewing 20 posts - 1,001 through 1,020 (of 1,023 total)
  • Author
    Posts
  • #484096
    yellaD
    Pro

    I think I’m flip flopping on the 7″ angle grinder, I’ll buy the 4″ as the smaller size is more ideal. I can keep saving for something else now….priorities keep changing so.

    #484098
    Doobie
    Moderator

    I think I’m flip flopping on the 7″ angle grinder,

    What did you have in mind for it? It’s a big and heavy unit.

    #484109
    yellaD
    Pro

    I think I’m flip flopping on the 7″ angle grinder,

    What did you have in mind for it? It’s a big and heavy unit.

    Just to cut tile first, then to keep around for general purpose. Also to grind down welds cuz I just met a welding enthusiast.

    #484117

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    That’s a nice little selection of bits there. I looking at getting the Bosch lock-miter bit at some point. But other things are ahead of it on my list for now.

    Yes, I agree. I got what I thought would be most commonly used in my shop. There are a lot of other things I would like too but they come later on the priority list.

    @JimDaddyO
    That’s a impressive list your putting in, looking forward to seeing your box come in, congrats on your order Jim.

    I like doing unboxing videos. It is like sharing a birthday or Christmas. Besides, they are easy to edit and put up.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #484120
    Doobie
    Moderator

    Yes, I agree. I got what I thought would be most commonly used in my shop. There are a lot of other things I would like too but they come later on the priority list.

    I tend to buy as I need them. Yes, every shop should have some basic ones on hand, but I learned a long time ago, that it is near impossible to get one of everything when it comes to router bits. I’d be router bit rich, and tool deprived if I didn’t learn that early on in the game.

    Btw, this thread is breaking. Who’s gonna have the honors of starting V10. This version 9 was @MrToolJunkie, but the one prior was @Boschmanbrian. I don’t really think anybody owns the history of this thread any longer by the looks of it.

    #484141
    smallerstick
    Pro
    North Bay, ON

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    That is a great start. You will be busy for a while.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #484146
    58Chev
    Pro
    Etobicoke, ON

    I like doing unboxing videos. It is like sharing a birthday or Christmas. Besides, they are easy to edit and put up.

    Eagerly awaiting your video Jim. Nice little list of accessories.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #484182

    The NMB300 non marring bearings are no longer available. So I guess I have a start on my next savings.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #484220
    madman_us
    Pro
    Palm Springs, CA

    Redemption Email is out. That was a long way of saving up piggies.
    Next on the list will be the PS42.


    So what did you redeem for? :) Inquiring minds what to know.

    yes yes , what you getting , and a big congrats on hitting HAM, , looking forward to seeing what you get Alex.

    @58Chev @Boschmanbrian
    I went for some L-Rack-S + i-boxx72-10, l-dolly, 24T 10″ table saw blade
    1/2 sheet sander, FL12 + starter kit

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #484224

    Redemption Email is out. That was a long way of saving up piggies.
    Next on the list will be the PS42.


    So what did you redeem for? :) Inquiring minds what to know.

    yes yes , what you getting , and a big congrats on hitting HAM, , looking forward to seeing what you get Alex.

    @58Chev @Boschmanbrian
    I went for some L-Rack-S + i-boxx72-10, l-dolly, 24T 10″ table saw blade
    1/2 sheet sander, FL12 + starter kit

    well congrats Alex, that’s a nice little haul you sent in for , some very nice tools and accessories , looking forward to your thoughts , congrats again

    #484245
    58Chev
    Pro
    Etobicoke, ON

    Redemption Email is out. That was a long way of saving up piggies.
    Next on the list will be the PS42.


    So what did you redeem for? :) Inquiring minds what to know.

    yes yes , what you getting , and a big congrats on hitting HAM, , looking forward to seeing what you get Alex.

    58Chev Boschmanbrian
    I went for some L-Rack-S + i-boxx72-10, l-dolly, 24T 10″ table saw blade
    1/2 sheet sander, FL12 + starter kit

    Alex,
    Very nice first redemption. Can never have enough BOXX’s.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #484248
    madman_us
    Pro
    Palm Springs, CA

    I don’t own any L-rack-S & iboxx72s yet.
    its a nice way to get started plus I can finally organize my electrical stuff and screws. I dont like my current HDX organizer, so they will be replaced soon.

    hey @MrToolJunkie
    looks like this thread is about to break.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #484273
    WoodsConstruction
    Pro
    Sudbury, ON

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    That’s definitely a nice little list. Looking forward to seeing it arrive!

    #484306
    woodman_412
    Moderator

    I think I’m going to settle in for the long haul and save up for the 1/2 sheet sander. My posting time has been cut down lately since a lot of my extra time has been taken up doing the DP Shop Talk videos and MPT stuff. It’ll take me awhile to save up 140K but I’ll get there eventually.

    Dan

    danpattison.com

    #484318
    madman_us
    Pro
    Palm Springs, CA

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    grats JimDaddyO on your redemption. thats quite a selection you listed there.
    I’m still waiting for my deduction. Guess it took a bit longer because Jim needed my address and I had to adjust the quantity of the iboxx72-10s.
    they do come in a pack of 3 and I asked for 4…so I lowered it and added another different item.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #484324
    Anonymous
    Inactive

    I think I’m going to let my points ride for a bit, see if an actual tool need pops up.

    #484342

    I think I’m flip flopping on the 7″ angle grinder, I’ll buy the 4″ as the smaller size is more ideal. I can keep saving for something else now….priorities keep changing so.

    That sounds like something you will get a lot of use out of.

    #484346
    RonW
    Pro
    Holladay, Tn

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    That’s a nice list of router bits Jim. They should serve you well.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #484566

    Sent my list in to Jim this morning:

    RA 1054 Deluxe Router guide
    NMB 300 Non marring bearing set

    Cove bits:

    84431m 1/2”
    84425m 1/4”
    84428m 3/8”

    Roundover bits:

    84405m 1/4”
    85594m 3/8”
    85595m 1/2”

    also:

    85974m 1/2 x 1 3 flute down cut spiral bit

    It will be a nice start of what I use most often. It was a chore finding all the part numbers.

    That’s a nice list of router bits Jim. They should serve you well.

    Points came off today. Time to build up again. I know I am going to be looking at that redemption page again soon even though I know I should not…lol.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #484588

    Here is a link to the new thread. Moderators – please close this one.

    http://bethepro.com/forums/topic/what-are-you-saving-up-for-version-10/

    Orange County, CA

Viewing 20 posts - 1,001 through 1,020 (of 1,023 total)
  • The topic ‘What are you saving up for? Version 9’ is closed to new replies.
queries. 1.303 seconds