dcsimg

V9…Today I used my Bosch…

Viewing 20 posts - 1 through 20 (of 1,006 total)
  • Author
    Posts
  • #674440
    RonW
    Moderator
    Holladay, Tn

    Here is the new thread. Let’s try and add as many in use photos as possible with this new thread!
    Here is the old one https://bethepro.com/forums/topic/v8today-i-used-my-bosch/

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #674445
    madman_us
    Pro
    Palm Springs, CA

    I used today my GSA18V-83 (compact recip saw) and PB180 for some yard work.
    I pruned a bunch of bushes.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #674462
    Clev08
    Pro

    As usual I used my 12” glide miter saw today, also used the corded barrel grip jigsaw.

    #674466
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Let’s try and add as many in use photos as possible with this new thread!

    That’s a good idea,,, I was ripping up some tile today with the DH1020VC

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #674479
    WoodsConstruction
    Pro
    Sudbury, ON

    18V circular saw came out to cut off some sheets that I let hang over while sheeting the floor.

    #674530

    Today it’s the heated jacket, and the PS30 and PS40,

    #674552
    madman_us
    Pro
    Palm Springs, CA

    I used today my GSA18V-83 (compact recip saw) and PB180 for some yard work.
    I pruned a bunch of bushes.

    I just uploaded my picture to the computer.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #674597
    cmeyer25
    Pro
    Bellingham, WA

    Back in the shop today and got to is my gts table saw and 10” glide. Also drilled a few holes in metal stakes with my ps31 and removed some screws with my ps41.

    Charlie
    __________________

    Instagram

    #674603
    Doobie
    Moderator

    Let’s try and add as many in use photos as possible with this new thread!

    That’s a good idea,,, I was ripping up some tile today with the DH1020VC

    I thought you’d be inclined to use the Hitachi extension with that.

    #674626
    theamcguy
    Pro
    Fayetteville, NC

    I used today my GSA18V-83 (compact recip saw) and PB180 for some yard work.
    I pruned a bunch of bushes.

    I just uploaded my picture to the computer.

    Nice photo. Really like the desert in the background.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #674642
    RonW
    Moderator
    Holladay, Tn

    I used today my GSA18V-83 (compact recip saw) and PB180 for some yard work.
    I pruned a bunch of bushes.

    I just uploaded my picture to the computer.

    Nice shot. Looks like your taking notes from Hangman on his photography.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #674732
    cmeyer25
    Pro
    Bellingham, WA

    Got to use my glide and table saw again today, along with my router table to finish shaping my plywood mallets.

    Charlie
    __________________

    Instagram

    #674737
    Masterbosch
    Pro
    Wayne, NJ

    Today I use these

    plusoneconstructionllc@gmail.com

    #674764
    theamcguy
    Pro
    Fayetteville, NC

    Got to use my glide and table saw again today, along with my router table to finish shaping my plywood mallets.

    Like that banner in the background, nice.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #674800
    cmeyer25
    Pro
    Bellingham, WA

    Got to use my glide and table saw again today, along with my router table to finish shaping my plywood mallets.

    Like that banner in the background, nice.

    Thanks 🙂 It’s pretty accurate for my shop, lol.

    Charlie
    __________________

    Instagram

    #674801
    RonW
    Moderator
    Holladay, Tn

    Got to use my glide and table saw again today, along with my router table to finish shaping my plywood mallets.

    Like that banner in the background, nice.

    I have wanted a Bosch banner for my shop for sometime. Tried to get Jim to send me one to no avail.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #674832

    I used my Bosch Router and Router table to mill some long stock, so I had to add infeed and outfeed tables.

    Will

    #674867

    Today I use these

    Haha, yeah easier than listing all your Bosch, nice picture Ibrahim.

    For me, it’s only the PB360C today,

    #674916
    cmeyer25
    Pro
    Bellingham, WA

    Sanded my mallets today with my 1250devs and then ripped some 2×10 with my CCS180. I switched between a 4.0 and my Core battery to try and get a read on the difference, but it was hard to tell. I wasn’t able to cut the same board multiple times so the cuts had different knots/ grain/ inclusions/ etc. one thing I did notice though, was that the saw really didn’t want to stay flat around any of the bigger obstacles. I was a little disappointed, to be honest. But it was some knotty pine.

    Charlie
    __________________

    Instagram

    #674947
    theamcguy
    Pro
    Fayetteville, NC

    I have wanted a Bosch banner for my shop for sometime. Tried to get Jim to send me one to no avail.

    I see them sometimes on eBay but all the Bosch stuff like that is expensive.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

Viewing 20 posts - 1 through 20 (of 1,006 total)
  • The topic ‘V9…Today I used my Bosch…’ is closed to new replies.
queries. 1.307 seconds