dcsimg

V8…Today I used my Bosch…

Viewing 20 posts - 961 through 980 (of 1,004 total)
  • Author
    Posts
  • #672742
    theamcguy
    Pro
    Fayetteville, NC

    1250 DEVS made lots of dust sanding today. I am pretty fond of it already.

    Whatcha making JDO. Must be something pretty nice.

    Automotive Pro
    Fayetteville, NC

    #672753
    RonW
    Moderator
    Holladay, Tn

    Had the MR23 router out running some base molding. And even did a little sanding with the 1/2 sheet sander. What a great combo!

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #672778
    JimDaddyO
    Pro
    Wawa, ON

    1250 DEVS made lots of dust sanding today. I am pretty fond of it already.

    Whatcha making JDO. Must be something pretty nice.

    Working on the guitar stand. I took a long break from it over winter while it was too cold and there was snow to move and all that firewood to split. I hope to be finished it this week sometime.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #672836

    Used the PS30 and PS40, plus the company IDS181,
    And now at home, using the PB180 and PB360C

    #672842
    GTokley
    Pro
    Belleville, ON

    I used the PS31 to put up a cork board in the spare today.

    Greg
    Do More of What Makes You Happy

    #672854
    xtsallad
    Pro
    Dallas, TX

    Dds183 zipping up art crates

    j

    #672887
    madman_us
    Pro
    Palm Springs, CA

    once again I had my DH1020VC demo hammer in action

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #672890
    WoodsConstruction
    Pro
    Sudbury, ON

    18V circular saw was up on the roof with me to cut in the roof vents, and my little GLM15 came out to measure up a job on the way home.

    #672951
    Doobie
    Moderator

    Used my 12V drill and driver to set some drywall wall plugs for a new location for a wall storage rack.

    #672989
    xtsallad
    Pro
    Dallas, TX

    Dds183 Zipping up crates and the clutch is the best e-clutch. Far better than any other e-clutch I’ve used. Actually, the gen2 m12 drill is the only other I’ve used and it’s not that great compared to the bosch. the m12 can too easily overdrive and the clutch is only reliable for harder fastening and lower rpm.

    j

    #673057
    Masterbosch
    Pro
    Wayne, NJ

    Today I use my vac090s vacuum. Gli1900 flood led. Ps42 12v impactor ids181 impactor mxh180 omt tool

    plusoneconstructionllc@gmail.com

    #673064
    cmeyer25
    Pro
    Bellingham, WA

    Last joint cut today with (again) hdh181, cordless jigsaw, and mr23evs router. Used my idh182 to pull screws from an old bed frame piece to use later.

    Charlie
    __________________

    Instagram

    #673093
    theamcguy
    Pro
    Fayetteville, NC

    Dds183 zipping up art crates

    Those are some nice crates, what are you shipping?

    Automotive Pro
    Fayetteville, NC

    #673108
    smallerstick
    Pro
    North Bay, ON

    I used my new CCS180 to break down some walnut for a new project. Amazing how easily it goes through hardwood.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #673146
    cmeyer25
    Pro
    Bellingham, WA

    I used my new CCS180 to break down some walnut for a new project. Amazing how easily it goes through hardwood.

    What blade are you using on it for that? I’m still rocking the factory blade, but have a Freud 20T waiting on the sidelines for anything nice I need to do.

    Charlie
    __________________

    Instagram

    #673208
    Doobie
    Moderator

    Used my F12 again today and a couple of drills.

    #673232
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Today we had the PB180 on in case we had any natural disasters or foreign attacks headed our way..

    #673241
    cmeyer25
    Pro
    Bellingham, WA

    Unclogged a couple of drains at my in-laws’ with a little help from my hdh181 and FL12.

    Charlie
    __________________

    Instagram

    #673273

    Slow Bosch day for me, it was just the PS30 in the shop, and then the PB180 at home.

    #673298

    I used my Bosch jigsaw to work on handles for the box joint jig – or as Dirty would out it: I used my jiggy on the jig 🙂

    Will

Viewing 20 posts - 961 through 980 (of 1,004 total)
  • The topic ‘V8…Today I used my Bosch…’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.032 seconds