dcsimg

V8…Today I used my Bosch…

Viewing 20 posts - 181 through 200 (of 1,004 total)
  • Author
    Posts
  • #651719
    Doobie
    Moderator

    Used a lot of Bosch today. PB360 as always, 18V circ, 18V grinder, 18V jigsaw, 18V impact driver, 10in Axial Glide, 12V driver, 12V impacts, 12V Flexi with RA head, 12V Flexi with off-center head..?…?….think I’ve forgotten some…..it’s been a long work day. Sigh!

    #651725
    cmeyer25
    Pro
    Bellingham, WA

    Just the FL12 for various flashlight type activities around the house for me. As well as my Bosch sweatshirt and t-shirt in the shop.

    Charlie
    __________________

    Instagram

    #651779
    smallerstick
    Pro
    North Bay, ON

    More sanding with the 1250 DEVS. It’s practically an everyday tool now.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #651798
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Used a lot of Bosch today. PB360 as always, 18V circ, 18V grinder, 18V jigsaw, 18V impact driver, 10in Axial Glide, 12V driver, 12V impacts, 12V Flexi with RA head, 12V Flexi with off-center head..?…?….think I’ve forgotten some…..it’s been a long work day. Sigh!

    Nice one!! Looks like you did a lot of work today.

    #651806

    Some Bosch going on today, and the blower to clean off my miter saw,
    Both 18 volt GLI18V??????
    And the IDH182, plus the PB360C
    And the fast charger, topping up some battery packs.

    Those are a few of the pumpkins from the other night,

    #651812
    Doobie
    Moderator

    Used a lot of Bosch today. PB360 as always, 18V circ, 18V grinder, 18V jigsaw, 18V impact driver, 10in Axial Glide, 12V driver, 12V impacts, 12V Flexi with RA head, 12V Flexi with off-center head..?…?….think I’ve forgotten some…..it’s been a long work day. Sigh!

    Nice one!! Looks like you did a lot of work today.

    Yep, it was a long day surrounded by the ‘blue’ army.

    .think I’ve forgotten some…..it’s been a long work day.

    The 18V LED Floodlight also went thru two batteries.

    #651817
    JimDaddyO
    Pro
    Wawa, ON

    Bosch 18V jig saw.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    Attachments:
    #651833
    Doobie
    Moderator

    Bosch 18V jig saw.

    Never thought of using a jigsaw to carve a pumpkin. What kind of blade works best for the least mess? A metal cutting blade perhaps?

    #651849
    cmeyer25
    Pro
    Bellingham, WA

    Used my IDH182 and HD181 this morning to drill out and attach the bottom rail for the privacy screens.

    Charlie
    __________________

    Instagram

    #651869
    madman_us
    Pro
    Palm Springs, CA

    Some Bosch going on today, and the blower to clean off my miter saw,
    Both 18 volt GLI18V??????
    And the IDH182, plus the PB360C
    And the fast charger, topping up some battery packs.

    Those are a few of the pumpkins from the other night,

    wow Brian – no matter which picture I click on, everywhere is Bosch 😀

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #651884
    theamcguy
    Pro
    Fayetteville, NC

    Bosch 18V jig saw.

    Did a great job on that pumpkin. Scary.

    Automotive Pro
    Fayetteville, NC

    #651897
    smallerstick
    Pro
    North Bay, ON

    1250DEVS again today. I flattened a live edge slab with the router sled and smoothed it with the sander. I’m really enjoying the dual mode feature.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #651908

    Some Bosch going on today, and the blower to clean off my miter saw,
    Both 18 volt GLI18V??????
    And the IDH182, plus the PB360C
    And the fast charger, topping up some battery packs.

    Those are a few of the pumpkins from the other night,

    wow Brian – no matter which picture I click on, everywhere is Bosch 😀

    Haha, yeah I guess that what they mean by I used my Bosch lol



    @JimDaddyO
    wow Jim, that’s awesome, nice job on that.

    #651928

    1250DEVS again today. I flattened a live edge slab with the router sled and smoothed it with the sander. I’m really enjoying the dual mode feature.

    Thats a great use for that tool. Perfect for it

    #651937
    JimDaddyO
    Pro
    Wawa, ON

    Bosch 18V jig saw.

    Never thought of using a jigsaw to carve a pumpkin. What kind of blade works best for the least mess? A metal cutting blade perhaps?

    I used a Bosch T119BO blade. The thin one that makes the tight corners for wood and plastic. A bit of a mess but not too bad.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #651978
    hojo04
    Pro
    Burton, Michigan

    Bosch 18V jig saw.

    Nice carving with a jig.

    #651987
    JimDaddyO
    Pro
    Wawa, ON

    Another day, another grab of the socket ready impact. I think I use it just about any time I do anything.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #652007
    Doobie
    Moderator

    Bosch 18V jig saw.

    Never thought of using a jigsaw to carve a pumpkin. What kind of blade works best for the least mess? A metal cutting blade perhaps?

    I used a Bosch T119BO blade. The thin one that makes the tight corners for wood and plastic. A bit of a mess but not too bad.

    How bad was it for getting pumpkin gunk out of the jigsaw? That’s the part I kinda think I wouldn’t relish dealing with.

    #652012
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    We been using the new Bosch table saw a lot at the site.

    #652022
    madman_us
    Pro
    Palm Springs, CA

    Bosch 18V jig saw.

    Never thought of using a jigsaw to carve a pumpkin. What kind of blade works best for the least mess? A metal cutting blade perhaps?

    I used a Bosch T119BO blade. The thin one that makes the tight corners for wood and plastic. A bit of a mess but not too bad.

    How bad was it for getting pumpkin gunk out of the jigsaw? That’s the part I kinda think I wouldn’t relish dealing with.

    That’s the exact same question I asked myself after reading those comments.
    I believe cleaning off a recip saw is easier than a jigsaw.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

Viewing 20 posts - 181 through 200 (of 1,004 total)
  • The topic ‘V8…Today I used my Bosch…’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.308 seconds