dcsimg

V8…Today I used my Bosch…

This topic contains 351 replies, has 29 voices, and was last updated by  Masterbosch 6 hours, 54 minutes ago.

Viewing 20 posts - 1 through 20 (of 352 total)
  • Author
    Posts
  • #647795

    RonW
    Pro
    Holladay, Tn

    Here is the new thread. Let’s try and add as many in use photos as possible with this new thread!
    Here is the old one. https://bethepro.com/forums/topic/v7today-i-used-my-bosch/

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #647798

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    Thanks Ron,
    Using my FL10 great for spot checking the Cesium in each individual cell, plus making sure no contamination of the Cesium.

    #647810

    bethepro
    Keymaster
    Mt Prospect, IL

    Sounds intense.

    Email us at bethepro@bethepro.com

    #647829

    cmeyer25
    Pro
    Bellingham, WA

    Thanks for starting the new thread @ronw.

    Here’s last night using my FL12 to work on some ballasts. I’ve been replacing the fluorescent tubes with ballast compatible LED tubes, but when ballasts go, these tubes are also able to be wired straight through too – and they’re going to save me so much money and effort over their lifetime! The FL12 is perfect for this kind of work, because I can shut down the power and still have light right where I need it since the light just sticks to the T-track around the fixture. I seriously love this light 👍👍

    Attachments:

    Charlie
    __________________

    Instagram

    #647939

    Thanks Ron,
    Using my FL10 great for spot checking the Cesium in each individual cell, plus making sure no contamination of the Cesium.

    what exactly is that brian? @boschmanbrian 😀

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #647962

    WoodsConstruction
    Pro
    Sudbury, ON

    18V circular saw got quite the workout up on the roof. No cords no problems.

    #648007

    Doobie
    Pro
    Ajax, ON

    Used my Bosch 12V drill and impact along with my Bosch 18V jigsaw installing more siding. Also used the 1900 Lumen LED light and my F12 during clean up as it was getting dark.

    Kevin.

    #648047

    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I use the PB180 all day and it will play for 2 days on the 4.0ah battery.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #648090

    I used my IWMH182 and IDH182 today for changing rotors on wifeys car.

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #648101

    RonW
    Pro
    Holladay, Tn

    I use the PB180 all day and it will play for 2 days on the 4.0ah battery.

    That’s some good run time.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #648109

    Used my Bosch holey rail and the 32 mm router base (FSN OFA) for some router work on some new cabinets. Was nice to use it with a cordless router and not have to stress a power cord.

    Hooked up to my Bosch 18v vac (GAS18v-LI) and it got just about all the dust

    #648118

    smallerstick
    Pro
    Listowel, ON

    Ps22, PS32 and the colt got most of the work yesterday. The Colt is getting to be one of my favourite tools.

    If the women don't find you handsome, they should at least find you handy. -- Red Green

    #648131

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    IDH182 and 25618 plus PB360C and the HDH183 and a few more Bosch today

    #648188

    GTokley
    Pro
    Madoc, ON

    I used FL 12 LED light while removing the old caulking around bathtub. Add the right amount of light for this job.

    Greg

    Work Smarter Not Harder

    #648192

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    The 18 volt jigsaw was very impressive with my buddy Charles today,
    And I have to say, the IDH182 and 25618 plus the PB360C had great runtime today
    The only thing I found, is with the charger using it while being plugged into the generator, it’s starts charging, but when you demand Lots of power with on tools, the charger shops charging, but not a big deal, I had plenty of 4ah battery packs

    Oh and the little blower, actually blew some guys away when I used it to clean off the miter station lol

    #648204

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    Actually the other framing Carpenter had his Bosch radio going also,
    And after seeing me pull out numerous Bosch tools, I think he was kinda impressed lol

    My little barn rat daughter, she spent pretty much the day at the stables with me lol

    We were rocking both Bosch radios, great day

    #648218

    hojo04
    Pro
    Burton, Michigan

    IDH182 and 25618 plus PB360C and the HDH183 and a few more Bosch today

    Nice pics. Loo,so like you got a mobile shop. Looks good.

    #648220

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    IDH182 and 25618 plus PB360C and the HDH183 and a few more Bosch today

    Nice pics. Loo,so like you got a mobile shop. Looks good.

    Yes, thank you. I lent my Idh182 with the 5/16 magnetic bit to my friends friend to remove some Tapcons,
    He was definitely impressed with the Bosch tools, I’ll try to get more pictures tomorrow.

    #648292

    hojo04
    Pro
    Burton, Michigan

    Used my PB360 radio to have something to listen to while cleaning my Mom’s place.

    #648311

    Used the 18V jig saw to cut a notch out of a piece of trim for a neighbour.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

Viewing 20 posts - 1 through 20 (of 352 total)

You must be logged in to reply to this topic.

queries. 1.652 seconds