dcsimg

V6.0 Toolaholic Public Announcement Page

Viewing 20 posts - 941 through 960 (of 1,011 total)
  • Author
    Posts
  • #306721
    RonW
    Moderator
    Holladay, Tn

    Got a few goodies today.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    Attachments:
    #306726
    asevereid
    Pro
    Kamloops, BC

    Oops again…
    Nothing major, but snagged a 5gal compressor for $60 today.
    I expect it will perform as well as a $60 compressor.
    Anyways, no pics from me, so here’s what the interweb has:

    And here’s the specs from the same model, re-branded:
    http://www.canadiantire.ca/en/pdp/mastercraft-5g-compressor-matte-1998563p.html#.VRn5OOGGPdE

    Still waiting to get a Rolair.

    Lurking Hit and Run poster.

    #306734

    New C.K #2 phillips, arrived from England this afternoon. Had a few back years ago, branded Ideal, and they were superb

    That sure looks like a nice screwdriver. I appreciate German made screwdrivers also. I am surprised that it was free shipping. Its always nice but a shocker coming from England.

    Welcome to BeThePro Whitehill. Good to have you.

    #306736
    monman1
    Pro

    Oops again…
    Nothing major, but snagged a 5gal compressor for $60 today.
    I expect it will perform as well as a $60 compressor.
    Anyways, no pics from me, so here’s what the interweb has:

    And here’s the specs from the same model, re-branded:

    http://www.canadiantire.ca/en/pdp/mastercraft-5g-compressor-matte-1998563p.html#.VRn5OOGGPdE

    Still waiting to get a Rolair.

    Nice buy! Most pawn shops in my area want $100 for that compressor

    Member since April 4, 2014

    doer of all , master of none.

    Attachments:
    #306805
    redwood
    Pro

    Welcome to BTP @whitehill

    Please don’t think of me as a bad guy, but can welcomes go to either a topic started by a new poster or preferably in the introduction folder. I say this because this is probably a well subscribed topic and all the welcomes clog my email box. The moderators should pick up on this.

    welcome Whitehill.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #306806

    Uh oh, there is a local listing for a like-new JMPv2 Jointmaker Pro + Precision fence + Stand… run away John, run away!

    John S

    #306834
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Sounds like a tough competition. Are you going to enter Dirty? Or leave it for the young ones?

    Well if I enter I’ll get a 50$ gift card to use at Slims. So I just may.

    #306892
    theamcguy
    Pro
    Fayetteville, NC

    Sounds like a tough competition. Are you going to enter Dirty? Or leave it for the young ones?

    Well if I enter I’ll get a 50$ gift card to use at Slims. So I just may.

    Oh man that is incentive enough right there. Go for it.

    Automotive Pro
    Fayetteville, NC

    #306901
    NJBuilder
    Pro
    Brick, NJ, 500,000 HAM

    Sounds like a tough competition. Are you going to enter Dirty? Or leave it for the young ones?

    Well if I enter I’ll get a 50$ gift card to use at Slims. So I just may.

    That’s a good deal anyway.

    #306966
    RonW
    Moderator
    Holladay, Tn

    Sounds like a tough competition. Are you going to enter Dirty? Or leave it for the young ones?

    Well if I enter I’ll get a 50$ gift card to use at Slims. So I just may.

    Oh man that is incentive enough right there. Go for it.

    That’s what I’m thinking. And who knows you might do well and get in the finals.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #307137
    Nyx
    Pro
    Pittsburgh, PA

    Got a few goodies today.

    nice stuff you got there. Is that your first dewalt sorter case or do you have others and needed more?

    #307147

    UPS guy showed up after supper, with my new Ergodyne canvas utility buckets.

    Nice bag lol.
    No really they look well made, and practical, I assume you will be using them for your work / electric.

    @RonW, congratulations nice little stash,



    @asevereid
    , I heard good things about that little compressor, they don’t make that model anymore, now it’s just the Mastercraft.

    #307305
    crotalusco
    Pro
    west bend, wi

    got a couple cheap performax grinders on the job today. They sure are no bosh but good for job disposable units

    #307342
    Anonymous
    Inactive

    Nice bag lol.
    No really they look well made, and practical, I assume you will be using them for your work / electric.

    No, they’re not for trips down to the shore. Lol

    #307461
    RonW
    Moderator
    Holladay, Tn

    Got a few goodies today.

    nice stuff you got there. Is that your first dewalt sorter case or do you have others and needed more?

    That’s my 4th DeWalt box. They are great for nails and screws. Thinking about another one for drill bits and such.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #307505

    Got a few goodies today.

    nice stuff you got there. Is that your first dewalt sorter case or do you have others and needed more?

    That’s my 4th DeWalt box. They are great for nails and screws. Thinking about another one for drill bits and such.

    That Dewalt box looks sturdy. If I already wasn’t heavily invested in i-Boxxes, I would get those.

    Are they heavy in weight without anything in it?

    #307527
    utopia78
    Pro
    Toronto, ON

    Hitting up HD tomorrow to get a few hand tools. It’s been way to long!

    A Working Pro since 2004

    #307556
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Sounds like a tough competition. Are you going to enter Dirty? Or leave it for the young ones?

    Well if I enter I’ll get a 50$ gift card to use at Slims. So I just may.

    Oh man that is incentive enough right there. Go for it.

    That’s what I’m thinking. And who knows you might do well and get in the finals.

    No it’s the same 5 or 6 guys every year in the finals. They must train hard to get there. They go through that 4×4 with the bit and brace in seconds.

    #307707
    RonW
    Moderator
    Holladay, Tn

    Got a few goodies today.

    nice stuff you got there. Is that your first dewalt sorter case or do you have others and needed more?

    That’s my 4th DeWalt box. They are great for nails and screws. Thinking about another one for drill bits and such.

    That Dewalt box looks sturdy. If I already wasn’t heavily invested in i-Boxxes, I would get those.

    Are they heavy in weight without anything in it?

    Not to heavy. I really like them for fasteners.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #307710

    Hitting up HD tomorrow to get a few hand tools. It’s been way to long!

    What sort of hand tools you looking for.

Viewing 20 posts - 941 through 960 (of 1,011 total)
  • The topic ‘V6.0 Toolaholic Public Announcement Page’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.343 seconds