September 9, 2016 at 6:13 pm #566307WoodsConstructionProSudbury, ON
18V circular saw for a few odds and ends since I didn’t feel like running any power.September 9, 2016 at 6:25 pm #566308AustinProCovington, KY
Used almost all of my drills hdh181, dds182, ps21, idh182September 9, 2016 at 6:44 pm #566314TopNotchProelmwood park, NJ
I was the envy of a few using my miter saw stand today.
So nice to use.
Working Pro since 1993
Tom MSeptember 9, 2016 at 7:13 pm #566328
Used the PS40, and when I got home, used the little vac,
The runtime on the 2ah is pretty good, figured I would try it quickly, cleaned the car with it. Works pretty good, had to empty the container a couple of times. My car was pretty bad,September 9, 2016 at 8:34 pm #566357monman1Pro
I used my Bosch 12v ps41 impact to screw down deck boards.
Member since April 4, 2014
doer of all , master of none.September 10, 2016 at 2:27 am #566478rylimProMissouri City, Texas
I used my IDH182 to remove my wheel lug nut.September 10, 2016 at 5:17 am #566499smallerstickProNorth Bay, ON
I used my PS22 to run hose clamps on my DC system.
BE the change you want to see.
Even if you can’t Be The Pro… Be The Poster you’d want to read.September 10, 2016 at 10:04 am #566571theamcguyProFayetteville, NC
used the little vac,
The runtime on the 2ah is pretty good, figured I would try it quickly, cleaned the car with it. Works pretty good, had to empty the container a couple of times. My car was pretty bad,
Not bad run time from the 2Ah battery to be able to fill up the container twice.
Fayetteville, NCSeptember 10, 2016 at 3:07 pm #566718DirtyWhiteBoyProHonolulu,, Hi.
Using my 12v jiggy to cut in a bunch of electrical boxes around our current build. Quick, cordless, easy!
That’s a nice use of the jiggy, did you start the cuts with the 6½” cir saw?September 10, 2016 at 3:14 pm #566726MasterboschProWayne, NJ
I used the gbl180 blower to blow the rh540m was dirty I put a shelf on my tenants livingroom used the bosch laser alone with impactor to put the screws in
email@example.comSeptember 10, 2016 at 3:28 pm #566732DirtyWhiteBoyProHonolulu,, Hi.
I used the PB360 all week with the blueteeth going to keep us entertained on the site where only 2 stations come in with everything from PMJ to 80s punk to 70 disco. What a great tool.September 10, 2016 at 3:41 pm #566735r-iceProDurham region, ON
I used my pb360 with bluetooth today as well, linked it up to my macbook air and just streamed music to it, was simply fantastic to be able to do that. such a portable setup.September 10, 2016 at 3:45 pm #566736WoodsConstructionProSudbury, ON
Had my socket ready impact and cordless circular saw out this afternoon doing a little bit of work in my backyard.September 10, 2016 at 4:07 pm #566741
Just the PB180 today, cleaned up the backyard. I still can’t get over the sound for a small radio.September 10, 2016 at 7:29 pm #566798madman_usProPalm Springs, CA
I used my SGH182, MX30 and PB360 today in the garage
"If you're going to do something, do it right the first time"
Palm Springs, CASeptember 10, 2016 at 8:16 pm #566820SiberianPro
Not much today, painting the outside, tomorrow is different. Guess the wife thinks that I will be able to start a bank account someday, so now I’m building stalls for my sons horse (when we get it)September 10, 2016 at 9:09 pm #566837rylimProMissouri City, Texas
Used my Bosch OMT to remove the chalking in my bathroomSeptember 12, 2016 at 11:37 am #567569
Used the PS30 today, just to buff out some aluminum with a sanding wheel. I cut it with the bandsaw, then used the rasp to even it out, and finished it with the sanding wheel.
Attachments:September 12, 2016 at 12:57 pm #567584wbembridPro
Bosch router to mill some custom trim for a new tile top table (if it works out I will post a picture), and my Bosch countersink for the support wings for the hollow chisel mortise.
WillSeptember 12, 2016 at 1:41 pm #567594cmeyer25ProBellingham, WA
Used my CM10GD and GOP40-30 today and made another geometric shelf. I’m really liking how the multi tool sands. I love being able to get the little cracks and crevices on routered pieces. And for plywood or thin pieces, it doesn’t seem to chip the edges nearly as much.
- The topic ‘V5…Today I used my Bosch…’ is closed to new replies.