dcsimg

V4…Today I used my Bosch…

Viewing 20 posts - 41 through 60 (of 1,008 total)
  • Author
    Posts
  • #510698
    58Chev
    Pro
    Etobicoke, ON

    Jigsaw to cut the hole in my Big Green Egg table top.



    @wbembrid
    Will,
    Nice Egg table. You design it yourself? or made from plans?

    I’d thought of building something like that for my KEG.

    “If you don’t pass on the knowledge you have to others, it dies with you”
    — Glenn Botting

    #510729
    RonW
    Moderator
    Holladay, Tn

    Jigsaw to cut the hole in my Big Green Egg table top.

    Looks good. I have to build one for a Kamado Joe grill in the near future.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #510773
    Doobie
    Moderator

    Jigsaw to cut the hole in my Big Green Egg table top.

    I’m envious. Until I build my deck and surrounding area, I’m holding off on getting an Egg which I’ve wanted since I first discovered them well over ten years ago.

    Their pre-built stands are pricey and by building your own you saved some bucks. Good for you. 👌

    #510831
    theamcguy
    Pro
    Fayetteville, NC

    Used my PB360 to listen to the NASCAR Race while I sorted fasteners out in the shop. Took all afternoon.

    Automotive Pro
    Fayetteville, NC

    #510840

    Jigsaw to cut the hole in my Big Green Egg table top.

    Very very nice set up, I assume you also made that very nice table to.
    What’s the green spice bottle besides it 🙂 lol

    #510854
    r-ice
    Pro
    Durham region, ON

    was using the glm15 to measure an area out and also impressed my friend, he went out to pick one up

    #510865

    Jigsaw to cut the hole in my Big Green Egg table top.

    @wbembrid Will,
    Nice Egg table. You design it yourself? or made from plans?

    I’d thought of building something like that for my KEG.

    I read lots of plans online, then modified them to fit with the materials I had on hand: rough cedar 4×4 that I milled down to 3 7/8 🙂 lap-jointed together for the end supports, one 4×4 resawed into 2 2x4s for the center support and 5/4 cedar decking. The egg is sitting on an 18×18 (17.5 inches square) concrete square in an angle frame, all sitting on 4″ casters. This site had lots of pictures of other peoples’ projects : http://www.scottmoore.net/projects/egg/

    Will

    #510866

    Jigsaw to cut the hole in my Big Green Egg table top.

    Very very nice set up, I assume you also made that very nice table to.
    What’s the green spice bottle besides it 🙂 lol

    That is my favorite steak spice 🙂 “The Christmas Star” LOL

    Will

    #510882
    58Chev
    Pro
    Etobicoke, ON

    I read lots of plans online, then modified them to fit with the materials I had on hand: rough cedar 4×4 that I milled down to 3 7/8 lap-jointed together for the end supports, one 4×4 resawed into 2 2x4s for the center support and 5/4 cedar decking. The egg is sitting on an 18×18 (17.5 inches square) concrete square in an angle frame, all sitting on 4″ casters. This site had lots of pictures of other peoples’ projects : http://www.scottmoore.net/projects/egg/

    Will,
    ThanX for the link. Lots of other neat stuff on that Scott Moore’s site.

    “If you don’t pass on the knowledge you have to others, it dies with you”
    — Glenn Botting

    #510971
    Austin
    Pro
    Covington, KY

    The more and more I use this jig saw the more I like it

    #510985
    utopia78
    Pro
    Toronto, ON

    Used my Bosch brushless 18v drill to fix the door plate I bent. It kept getting jammed so I had to remove it and straighten it out.

    A Working Pro since 2004

    #510987
    utopia78
    Pro
    Toronto, ON

    The more and more I use this jig saw the more I like it

    Lots of Bosch goodies in that pic. What sortimo box is that? Gedore?

    A Working Pro since 2004

    #511006
    jkirk
    Moderator
    halifax, nova scotia

    mainly just used my radio and some bosch blades on the circ saw and recip blade.. we were setting and tying rebar and bracing the icf

    heres a tip, dont fart in a space suit

    #511040
    Austin
    Pro
    Covington, KY

    The more and more I use this jig saw the more I like it

    Lots of Bosch goodies in that pic. What sortimo box is that? Gedore?

    It’s a bosch lboxx 3 the thing that attaches to the lid is gedore. I had to import it from Germany.

    #511088
    Clev08
    Pro

    Used the cs10 to frame a roof above a bay window.

    #511092
    ChadM
    Moderator
    Rogers, Ohio

    I had the PB360 rocking, using my socket ready impact to run deck screws, and had out the Bosch wormy and 18v jigsaw for some cuts on a deck today.

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

    #511150
    RonW
    Moderator
    Holladay, Tn

    The more and more I use this jig saw the more I like it

    Have you ever given any thought to a coping foot for the jig saw?

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #511152
    Austin
    Pro
    Covington, KY

    Actually I have @RonW , i was thinking about it today right before I took this picture. I have always coped from the top and have always gotten really nice results, but I wouldn’t mind going from the bottom to see how it does.

    #511157

    Nice collection of Bosch gear @Austin!

    Today I used our 18v brushless sds to drill the tile for the range hood and my PS42 to install the screws.

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #511263
    theamcguy
    Pro
    Fayetteville, NC

    I had the PB360 rocking, using my socket ready impact to run deck screws, and had out the Bosch wormy and 18v jigsaw for some cuts on a deck today.

    Installing new or doing repairs Chad?

    Automotive Pro
    Fayetteville, NC

Viewing 20 posts - 41 through 60 (of 1,008 total)
  • The topic ‘V4…Today I used my Bosch…’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.034 seconds