dcsimg

V4…Today I used my Bosch…

Viewing 20 posts - 21 through 40 (of 1,008 total)
  • Author
    Posts
  • #509235
    theamcguy
    Pro
    Fayetteville, NC

    Used my GTL 3 laser today while doing the floor at the office job.

    Oh I remember you got that laser for the floor job at the Ford Dealership. Looks like you are becoming a flooring expert.

    Automotive Pro
    Fayetteville, NC

    #509246
    RonW
    Moderator
    Holladay, Tn

    Used my GTL 3 laser today while doing the floor at the office job.

    Oh I remember you got that laser for the floor job at the Ford Dealership. Looks like you are becoming a flooring expert.

    Not me!! I’m not that fond of flooring. To much time on ones knees.
    The GTL3 is a nice tool to use when doing any flooring though.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #509281
    jponto07
    Moderator
    Bloomington, IN

    Not me!! I’m not that fond of flooring.

    Tell me about it…

    I used my ps31 to drill for some security camera wires. 1″ daredevil spade through a double top plate with no issues!

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #509294
    Austin
    Pro
    Covington, KY

    Not me!! I’m not that fond of flooring.

    Tell me about it…

    I used my ps31 to drill for some security camera wires. 1″ daredevil spade through a double top plate with no issues!

    Those 12v drills are really something, I did the same thing with my ps21 a while back, and those aren’t even the latest and greatest brushless

    #509295
    theamcguy
    Pro
    Fayetteville, NC

    Not me!! I’m not that fond of flooring.

    Tell me about it…

    I used my ps31 to drill for some security camera wires. 1″ daredevil spade through a double top plate with no issues!

    Yeah I really like the 12V line. I encourage everybody to try out a 12V tool you will like them. What are you installing Jon?

    Automotive Pro
    Fayetteville, NC

    #509492
    Clev08
    Pro

    Used a Skilsaw wormdrive today with a concrete blade.

    #509498
    RonW
    Moderator
    Holladay, Tn

    I used my GTL3 more today. It sure makes getting tile straight easier.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #509551
    madman_us
    Pro
    Palm Springs, CA

    I used my IDS181 and IDH182 + 2x FL12’s for the Impact Tough Bit Testing

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #509557
    utopia78
    Pro
    Toronto, ON

    I used my IDS181 and IDH182 + 2x FL12’s for the Impact Tough Bit Testing

    That’s a great use of Bosch tools! Go Madman on those Tough Bits!

    A Working Pro since 2004

    #509681
    theamcguy
    Pro
    Fayetteville, NC

    I used my IDS181 and IDH182 + 2x FL12’s for the Impact Tough Bit Testing

    And those were nice videos you posted too. Good use of the tools.

    Automotive Pro
    Fayetteville, NC

    #509985
    Austin
    Pro
    Covington, KY

    Just used my 2 brand new fl12’s that I got in the mail today, while finishing some landscaping when it was getting dark. WOW! I know everybody has talked very highly of these things on here and now I know why. I am going to definitely get more of them

    #509998
    madman_us
    Pro
    Palm Springs, CA

    I used my IDS181 and IDH182 + 2x FL12’s for the Impact Tough Bit Testing

    That’s a great use of Bosch tools! Go Madman on those Tough Bits!

    And those were nice videos you posted too. Good use of the tools.

    Thanks guys.
    I tried my best to get a nice test on camera.
    Today I removed all the screws out of the drywall with the IDH182.
    It took longer than driving them in haha

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #510000
    ChadM
    Moderator
    Rogers, Ohio

    Today I used my Bosch worm drive to cut floor joists, my Skilsaw Sawsquatch to cut 4x railing posts, and my Bosch socket ready impact to run Fastenmaster Thruloks. And of course I had the PB 360 jamming.

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

    #510034
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    my Skilsaw Sawsquatch to cut 4x railing posts,

    That’s a great tool to have!!

    #510038
    Doobie
    Moderator

    Today I used my 2013 made PS41 Impact against my newly bought PS41 2015 model I just bought on clearance at half price just to see if they performed the same. Al is good it seems so far.

    #510142
    theamcguy
    Pro
    Fayetteville, NC

    Today I used my Bosch worm drive to cut floor joists, my Skilsaw Sawsquatch to cut 4x railing posts, and my Bosch socket ready impact to run Fastenmaster Thruloks. And of course I had the PB 360 jamming.

    What are you working on Chad? Sounds like a nice project.

    Automotive Pro
    Fayetteville, NC

    #510662
    jzmtl
    Pro
    Montreal, QC

    Splitting cinder blocks with Bosch rotary hammer, it’s like drilling through butter.

    #510666
    r-ice
    Pro
    Durham region, ON

    today i used brushless ps32 , ps 41, fl12 and the charger as i was running out of juice driving loads of screws in to the solar kiln. I did find out how crappy the milwaukee impact bits are though. I much prefer the vega bits over them.

    #510671
    58Chev
    Pro
    Etobicoke, ON

    It was wet and cold today but the PS32, PS41 & FL12 continued to chug along and keep up pace.
    My heavy Duty Blaklader kept my legs warm.

    “If you don’t pass on the knowledge you have to others, it dies with you”
    — Glenn Botting

    #510689

    Jigsaw to cut the hole in my Big Green Egg table top.

    Will

Viewing 20 posts - 21 through 40 (of 1,008 total)
  • The topic ‘V4…Today I used my Bosch…’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.044 seconds