dcsimg

V3…Today I used my Bosch…

Viewing 20 posts - 61 through 80 (of 1,007 total)
  • Author
    Posts
  • #439950
    monman1
    Pro

    I used my Bosch worm drive saw to cut a bit of everything. I had the saw on and a Skil 77 on, and my 10 amp compressor all on at the same time on 100′ of 12g cord.

    Member since April 4, 2014

    doer of all , master of none.

    #440078
    r-ice
    Pro
    Durham region, ON

    today I used my fl12’s to light up my tool box, in the spot it is in now, when you open the lid all the way it blocks the light so you end up looking for tools in the dark.

    #440105
    theamcguy
    Pro
    Fayetteville, NC

    in the spot it is in now, when you open the lid all the way it blocks the light so you end up looking for tools in the dark.

    Looks like you’ll have to move the light down to solve the problem.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #440281
    jzmtl
    Pro
    Montreal, QC

    I’ve always wondered how much faster a rotary hammer is compare to a hammer drill, so I finally tried them side by side.

    #440385
    crotalusco
    Pro
    west bend, wi

    Nice video indeed. As you found out there is NO comparison. This is the reason I do not own ans see no use for a “hammer drill”

    #440414

    I have both a rotary hammer and a hammer drill. (Technically I have two). All are Bosch. I use the hammer drill mostly as a regular drill but love the ability to use it in masonry. It works great in softer items like cinder blocks or in a pinch when I don’t have electricity.

    To keep on topic, sadly I didn’t get to use any of my Bosch toys today as I am on vacation. If I had room to pack them I would find a use for them.

    Anything is possible if your wallet is thick enough ~ my father

    #440488
    madman_us
    Pro
    Palm Springs, CA

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #440491

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    Thats a lot of Bosch for a few chickens.

    #440512
    monman1
    Pro

    I used my Bosch worm drive saw to cut roof rafters and did great!

    Member since April 4, 2014

    doer of all , master of none.

    #440608
    theamcguy
    Pro
    Fayetteville, NC

    Jie Thank you for the very informative video. I really enjoyed it.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #440662
    madman_us
    Pro
    Palm Springs, CA

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    Thats a lot of Bosch for a few chickens.

    they need a save home, so every tool comes in action 😀
    few? 😀 i have quite a lot. more than the average homeowner

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #440683
    jzmtl
    Pro
    Montreal, QC

    Nice video indeed. As you found out there is NO comparison. This is the reason I do not own ans see no use for a “hammer drill”

    Yep 15 seconds vs. 2 minutes. At one point I wanted to buy one of those two speed hammer drills as an “upgrade”, very glad I didn’t.

    Jie Thank you for the very informative video. I really enjoyed it.

    No problem, it was fun doing it. But man it’s hard to watch again, I hate hearing myself talk.

    #440692

    @jzmtl nice comparison video, thanks for taking the time.

    #440728

    Taking advantage of the incredible weather 52318, 1662 and the 1644-24

    Sweet, your building a tree

    #440729

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    Thats a lot of Bosch for a few chickens.

    they need a save home, so every tool comes in action 😀
    few? 😀 i have quite a lot. more than the average homeowner

    Get a chance throw a pic up of your coop. Always looking for new ideas as we are redoing everything

    #440735
    58Chev
    Pro
    Etobicoke, ON

    I’ve always wondered how much faster a rotary hammer is compare to a hammer drill, so I finally tried them side by side.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/QPgRU_IIHzA?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Thanks for taking the time on the comparison and posting the video.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #440759

    Taking advantage of the incredible weather 52318, 1662 and the 1644-24

    @Boschmanbrian, Heck of a job building that tree, looks real in the 2nd pic.

    #440770
    madman_us
    Pro
    Palm Springs, CA

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    Thats a lot of Bosch for a few chickens.

    they need a save home, so every tool comes in action 😀
    few? 😀 i have quite a lot. more than the average homeowner

    Get a chance throw a pic up of your coop. Always looking for new ideas as we are redoing everything

    i gonna open my own thread soon about it.
    its not fully finished, needs couple windows and more trim.
    i never made a plan for that particular coop, i build it while i go.
    its 6’W x 4’D x 4’H, its 2′ above the ground, 6 nesting boxes, 2 roosting levels with 8 roosting bars, fall thru floor with removable tray

    Attachments:

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #440782

    GCM12SD, IDH182, PB360 and my new impact set from lowes
    busy with some modifications at “The Hen Inn” coop 😀

    Thats a lot of Bosch for a few chickens.

    they need a save home, so every tool comes in action 😀
    few? 😀 i have quite a lot. more than the average homeowner

    Get a chance throw a pic up of your coop. Always looking for new ideas as we are redoing everything

    i gonna open my own thread soon about it.
    its not fully finished, needs couple windows and more trim.
    i never made a plan for that particular coop, i build it while i go.
    its 6’W x 4’D x 4’H, its 2′ above the ground, 6 nesting boxes, 2 roosting levels with 8 roosting bars, fall thru floor with removable tray

    at floor space of 4 sq ft for bird, and 65 birds, your going to need a few more

    #440783
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Nice video .. The rotary just tears it up.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

Viewing 20 posts - 61 through 80 (of 1,007 total)
  • The topic ‘V3…Today I used my Bosch…’ is closed to new replies.
queries. 1.516 seconds