dcsimg

V3…Today I used my Bosch…

Viewing 20 posts - 1 through 20 (of 1,007 total)
  • Author
    Posts
  • #437144

    Here is the new one…@ChadM @Dabbs or another mod can close the old one.

    Today I used my 12v impact to hang some new lights in my basement storage are for the wifey.

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #437149
    jponto07
    Moderator
    Bloomington, IN

    I used my 4100 table saw for quite a while today while carving up a bunch of hardwoods for cutting boards. Between the table saw and my old Ryobi planer, I filled most of a 40 gallon trash can with dust and chips.

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #437152
    madman_us
    Pro
    Palm Springs, CA

    @Siberian
    no chicken dance 😛 i closed the door and kept everyone outside that they dont do that haha, or try to escape and get eaten by a bobcat

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #437187
    RonW
    Pro
    Holladay, Tn

    I used my 4100 table saw for quite a while today while carving up a bunch of hardwoods for cutting boards. Between the table saw and my old Ryobi planer, I filled most of a 40 gallon trash can with dust and chips.

    It amazes me how much dust a planer will create in a short time.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #437239
    Doobie
    Moderator

    Used that right angle driver in a tight spot again today along with other Bosch drills/drivers and my PB360.

    #437244
    r-ice
    Pro
    Durham region, ON

    I used my 4100 table saw for quite a while today while carving up a bunch of hardwoods for cutting boards. Between the table saw and my old Ryobi planer, I filled most of a 40 gallon trash can with dust and chips.

    It amazes me how much dust a planer will create in a short time.

    oh yah i didn’t realize that when i was using it to plane my cutting boards. it was like a snowstorm outside. I got to lazy to lug my dust collector out as it was deep in the basement and I couldn’t be bothered to bring it out with me.

    #437298
    theamcguy
    Pro
    Fayetteville, NC

    Between the table saw and my old Ryobi planer, I filled most of a 40 gallon trash can with dust and chips.

    Man that is a lot of waste. Too bad you can’t find a use for that.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #437376
    jponto07
    Moderator
    Bloomington, IN

    Between the table saw and my old Ryobi planer, I filled most of a 40 gallon trash can with dust and chips.

    Man that is a lot of waste. Too bad you can’t find a use for that.

    A use for the dust/chips? It will likely get dumped in one of the flower beds as mulch for the time being. In the spring, I usually get a load of mulch that I’ll throw over the wood chips.

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #437379
    58Chev
    Pro
    Etobicoke, ON

    Man that is a lot of waste. Too bad you can’t find a use for that.

    A use for the dust/chips? It will likely get dumped in one of the flower beds as mulch for the time being. In the spring, I usually get a load of mulch that I’ll throw over the wood chips.

    I usually carry my TS out of the garage to cut and just leave all the dust in the yard. Eventually it breaks down or washes away.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #437395

    Used my Bosch grinder to cut down some metal roofing that we are putting on the walls of a bathroom.

    #437674
    thedude306
    Moderator
    Foam Lake, SK

    I love this thread. It should be titled I didn’t use a bosch today so that bosch knows what we need 🙂

    I am using bosch every day!

    IMG_3163 by Brad Taylor[/url], on Flickr

    Brad T
    Self employed Pro since 2014!!

    #437681
    madman_us
    Pro
    Palm Springs, CA

    i used an older Boschhammer today to set another post of the steel fence we are installing.
    that post went straight into solid rock. some concrete around and let it set.
    i beliebe it was a 13116EVS or so.

    @thedude306
    hey brad whats that black&yellow piece at the cord of the barrel jigsaw ?!

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #437684
    thedude306
    Moderator
    Foam Lake, SK

    @madman_us

    That’s a neutrik true one conector. I have them on all my tools regardless of brand. It’s a quick disconnect for the poer cords. You can see one on the router and the bench as well. Really slick.

    I have a thread on here you can search for. If you can’t find it shoot me a PM

    Brad T
    Self employed Pro since 2014!!

    #437696
    crotalusco
    Pro
    west bend, wi

    I love this thread. It should be titled I didn’t use a bosch today so that bosch knows what we need :-)

    I am using bosch every day!

    IMG_3163 by Brad Taylor[/url], on Flickr

    agreed, use my brushless impact and metal saw every day on the job without fail. Grinder anf bulldog a couple times a week.

    #437705
    madman_us
    Pro
    Palm Springs, CA

    thats pretty cool. i checked it out on youtube.
    i’ll do that too as soon as my shop is more organized and set up

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #437778

    Today I used my MX30 to cut holes in cabinets and my PS22 to install receptacles in said cabinets. I also used my daredevil paddle bit to drill holes for mounting lights above the sink cabinets. Oh, I used someone else’s 4100 to make a template out of plywood which I used to cut said holes.

    Anything is possible if your wallet is thick enough ~ my father

    #437789
    madman_us
    Pro
    Palm Springs, CA

    I am using bosch every day!

    Same here because I don’t own any other tools.
    Besides of my porter cable table saw

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #437851
    r-ice
    Pro
    Durham region, ON

    I love this thread. It should be titled I didn’t use a bosch today so that bosch knows what we need :-)

    I am using bosch every day!

    IMG_3163 by Brad Taylor[/url], on Flickr

    I don’t know if you have shown it before, but I want to see more of that router table set up that you have going there. It looks really interesting, You have one of the dust extractors inside of it?

    #437869
    jzmtl
    Pro
    Montreal, QC

    @madman_us

    That’s a neutrik true one conector. I have them on all my tools regardless of brand. It’s a quick disconnect for the poer cords. You can see one on the router and the bench as well. Really slick.

    I have a thread on here you can search for. If you can’t find it shoot me a PM

    I remember reading your posts about installing them. Do you find them add any additional drag/catch/bend than regular cord?

    #437875
    utopia78
    Pro
    Toronto, ON

    Agreed that it is hard to find a day that a Bosch tools/products is not used.

    A Working Pro since 2004

Viewing 20 posts - 1 through 20 (of 1,007 total)
  • The topic ‘V3…Today I used my Bosch…’ is closed to new replies.
queries. 1.652 seconds