dcsimg

V17.0 GOT☼_☼ ¿WEATHER? #man it's getting cold☺

Viewing 20 posts - 201 through 220 (of 1,007 total)
  • Author
    Posts
  • #654583
    Masterbosch
    Pro
    Wayne, NJ

    Today it was raining around 45degree I had to cut it inside with wetsaw. Bosch tc10 did a amazing job capturing the water. We need new wetsaw from Bosch.

    plusoneconstructionllc@gmail.com

    #654585
    jponto07
    Moderator
    Bloomington, IN

    I was going to spray a bookcase and some custom trimwork, but its far too windy today! The temps are good enough at 65*, but the wind would leave full sized leaves stuck to my work pieces…

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #654588
    cranbrook2
    Pro
    Belgrave, Ontario , Canada

    We had light rain all day but really started pouring around 3 pm so it wasn’t a wasted day

    #654621
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Nice and cool here, highs can’t be but 80 or so.

    #654636
    theamcguy
    Pro
    Fayetteville, NC

    Starting out with rain but will turn sunny with temps in the low 60s.

    Automotive Pro
    Fayetteville, NC

    #654650
    WoodsConstruction
    Pro
    Sudbury, ON

    -5C and mostly sunny for the day, looks like a decent week ahead aswell as long as things don’t change.

    #654654
    smallerstick
    Pro
    North Bay, ON

    A little snow overnight but not bad right now. Not quite freezing.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #654658
    RonW
    Moderator
    Holladay, Tn

    Cool this morning at 32°. Not really going to warm up much. Highs in the mid 40’s.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #654660
    JimDaddyO
    Pro
    Wawa, ON

    We are under a snow squall watch with lake effect flurries. Not sure if there will be any wood cutting today or not. May give it a short go and burn a tank of fuel in the chainsaw.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #654662
    utopia78
    Pro
    Toronto, ON

    We are under a snow squall watch with lake effect flurries. Not sure if there will be any wood cutting today or not. May give it a short go and burn a tank of fuel in the chainsaw.

    Luckily it’s not going to hit us here in the city. Can only hold off the snow so long…

    A Working Pro since 2004

    #654669
    GTokley
    Pro
    Belleville, ON

    We snow overnight too. Just enough to cover the ground. A little windy today and temps around freezing.

    Greg
    Do More of What Makes You Happy

    #654673
    cranbrook2
    Pro
    Belgrave, Ontario , Canada

    We are getting belted with snow right now 🙁 , hopefully it doesn’t last .

    #654680
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    It’s very cold here too!!! Mid 60s and I feel like closing the windows but the sun will come up soon and warm us off😳

    #654689

    Was around 0 this morning, snow and beautiful outside.

    #654695
    MTRoads
    Pro
    Near Glacier National Park, MT

    Solid overcast today – looks like it could snow at any time. Don’t need it today as I’m back and forth to the shop cutting baseboard trim.
    Tracking snow into the house is not a real popular item with the wife. 🙂

    Stan
    From the Northwest corner of Montana.

    #654726
    TonyG
    Pro
    Colorado Springs, CO

    Still unseasonably warm where I am at but the mountains got about 12” of snow in one day!!

    #654734
    JimDaddyO
    Pro
    Wawa, ON

    Thick layer of snow now! Hope it stays cold enough because if it melts it will be muddy. The snow will make it easier to cut and split firewood.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #654738
    Doobie
    Moderator

    Cold and wimdy today with mostly clouds. Stayed indoors.

    #654770
    madman_us
    Pro
    Palm Springs, CA

    Last night it dropped down to 32F…temps during the day are still in the high 70s…tuesday apparently above 80

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #654789
    utopia78
    Pro
    Toronto, ON

    Feels like -6C this morning but going up to a balmy +6C this afternoon.

    A Working Pro since 2004

Viewing 20 posts - 201 through 220 (of 1,007 total)
  • The topic ‘V17.0 GOT☼_☼ ¿WEATHER? #man it's getting cold☺’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.736 seconds