dcsimg

V11… Today I used my Bosch…

Viewing 20 posts - 461 through 480 (of 616 total)
  • Author
    Posts
  • #754534

    Just the three Bosch power adapters for the phones , and the GLI 18 volt light to check out the furnace , and the hot water tank , just typical routine maintenance , change filter and so on.

    #754542
    JimDaddyO
    Pro
    Wawa, ON

    Some bits of trimming with the OMT, and of course the 12V driver was in my hand doing it’s thing too.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #754543
    GTokley
    Pro
    Belleville, ON

    12V driver was in my hand doing it’s thing too.

    Sounds like you are liking your 12V tools.

    Are using the drill/driver or impact driver?

    Greg
    Do More of What Makes You Happy

    #754547
    JimDaddyO
    Pro
    Wawa, ON

    Are using the drill/driver or impact driver?

    PS 41 impact driver. That little thing is a beast!

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #754548

    Are using the drill/driver or impact driver?

    PS 41 impact driver. That little thing is a beast!

    It’s the same design as the older generation of 18 volt impact. I wonder what the torque is like in comparison.

    #754551
    theamcguy
    Pro
    Fayetteville, NC

    PS 41 impact driver. That little thing is a beast!

    It sure is, I really like mine, use it all the time.

    Automotive Pro
    Fayetteville, NC

    #754560
    GTokley
    Pro
    Belleville, ON

    Are using the drill/driver or impact driver?

    PS 41 impact driver. That little thing is a beast!

    I have the same impact driver and yes it is a beast. Lately I have been using my PS 21 drill/driver instead of the PS41.

    Greg
    Do More of What Makes You Happy

    #754586
    Hangman
    Pro

    My PS41 has to be a decade old, it still runs perfect and the batteries hold a full charge. Love to put the 4.0 BAT on it so the sucker stands up.

    The master has failed more times than the disciple has ever tried.

    Over 25 years experience from NYC

    https://www.instagram.com/gothichangman/

    #754596
    GTokley
    Pro
    Belleville, ON

    Love to put the 4.0 BAT on it so the sucker stands up.

    That sure would be nice.

    How much heavier 4.0 Battery?

    Greg
    Do More of What Makes You Happy

    #754598

    My PS41 has to be a decade old, it still runs perfect and the batteries hold a full charge. Love to put the 4.0 BAT on it so the sucker stands up.

    Well looks like it’s not working , lol it’s lying down 😊😁, just kidding , they definitely have good impacts , I’ve been using the older PS40 for over ten years , and that was the first model , but it is starting to slow down.

    #754606
    Hangman
    Pro

    Honestly don’t notice any difference in weight, though I’m a guy who ran around with the Core 6.3ah 18V on my impact. Like BOOTHE the 4.0 BATS in the Core and the 12V platform. Would love to get my hands on a 6.0 12V if only it were on the points list here!!!



    @Boschmanbrian
    haven’t I taught you to use your imagination after all these years 😂 I know you’re a stand up guy 🥸

    The master has failed more times than the disciple has ever tried.

    Over 25 years experience from NYC

    https://www.instagram.com/gothichangman/

    #754621
    Miamicuse
    Pro
    Fort Lauderdale, Florida

    Is this spam lol?

    #754623
    Kamster
    Pro

    Is this spam lol?

    Google translate says:
    Wulff Beltton markets innovatively quality products that help save time and create a good working environment for our customers.

    #754625

    Spam attack lol 👆


    @RonW
    @ @ChadM
    I don’t think I didn’t use many Bosch today lol

    #754649

    Another Bosch day ,

    #754655
    Hangman
    Pro

    Used my GLI18V 1900N to drain my boiler and clean out the lint catch for my dryer…easier than changing the lightbulb in the the boiler room 🥸

    The master has failed more times than the disciple has ever tried.

    Over 25 years experience from NYC

    https://www.instagram.com/gothichangman/

    #754665
    theamcguy
    Pro
    Fayetteville, NC

    Used my GLI18V 1900N to drain my boiler and clean out the lint catch for my dryer…easier than changing the lightbulb in the the boiler room 🥸

    LOL I guess it is easier than changing the bulb, especially if it is up high.

    Automotive Pro
    Fayetteville, NC

    #754684

    Used my GLI18V 1900N to drain my boiler and clean out the lint catch for my dryer…easier than changing the lightbulb in the the boiler room 🥸

    LOL I guess it is easier than changing the bulb, especially if it is up high.

    Well he definitely picked the right light to brighten up any dark area ,

    #754685
    Hangman
    Pro

    It’s not high up I just keep forgetting to bring bulbs down to the basement 😂

    The master has failed more times than the disciple has ever tried.

    Over 25 years experience from NYC

    https://www.instagram.com/gothichangman/

    #754686
    JimDaddyO
    Pro
    Wawa, ON

    MR23 router, with a Bosch round over bit to treat the edge of a table we got with the place, then the 1250 DEVS sander to smooth it out so I could put some varithane on it.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

Viewing 20 posts - 461 through 480 (of 616 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.527 seconds