dcsimg

V-23.0 Toolaholic Public Announcement Page

Viewing 20 posts - 161 through 180 (of 1,006 total)
  • Author
    Posts
  • #656703
    TopNotch
    Pro
    elmwood park, NJ

    Looks like a new drill accessory kit from Dewalt that is compatible with the T-Stack.

    http://toolguyd.com/dewalt-t-stak-drawer-power-tool-accessory-set-h2017/

    I like that. The article doesn’t clarify whether or not it does replace a draw or click onto Tstaks.

    I like my Tstaks. I keep a small tower in the truck with the deep draws for putty, drill bits, driver’s etc… I have the little dual draw one but don’t want to put all my bits in there loosely. This seems to provide the organization in a slim profile.

    Working Pro since 1993

    Tom M

    #656707

    This showed up on the FedEx truck today, looking forward to adding them to my toolbelt!Not sure if I’ll use the straight ones much, I generally use red and green to do all my cutting.

    do these differ a lot from the previous generation of milwaukee snips?

    #656716
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #656728
    Doobie
    Moderator

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    That’s what I felt about it too. They should make a ten cup sized model with an insulated carafe or have a keep warm plate.

    #656747
    jponto07
    Moderator
    Bloomington, IN

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    Not to mention that it to takes more than 5 minutes to make that cup…

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    That’s what I felt about it too. They should make a ten cup sized model with an insulated carafe or have a keep warm plate.

    It would have to be corded….the Makita will do just ONE cup per battery.

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #656756
    Doobie
    Moderator

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    That’s what I felt about it too. They should make a ten cup sized model with an insulated carafe or have a keep warm plate.

    It would have to be corded….the Makita will do just ONE cup per battery.

    That I did not know. Wow, that sucks a lot of juice for just one cup of java.

    #656757

    Picked up these deep throats the other day. As the saying goes – you can never have enough clamps.

    #656769
    Sprokitz
    Pro
    Eastern shore of, Pa

    I like that. The article doesn’t clarify whether or not it does replace a draw or click onto Tstaks.

    It fits inside the drawer
    https://www.buyaparcel.com/wp-content/uploads/DWST1-70706_DT71569-1007×1024.jpg

    #656790
    theamcguy
    Pro
    Fayetteville, NC

    Makita’s cordless coffee maker is on sale. Pretty neat for the job site.

    http://toolguyd.com/makita-cordless-coffee-maker-for-38/

    It just makes too little coffee or I’d have one already. One cup at a time is a no go for me.

    Maybe DeWalt will make one for the Flex Volt system.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #656806

    This showed up on the FedEx truck today, looking forward to adding them to my toolbelt!Not sure if I’ll use the straight ones much, I generally use red and green to do all my cutting.

    I have 3 pair of yellow ones. Not sure how, I don’t recall ever buying or borrowing a set.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #656867
    TopNotch
    Pro
    elmwood park, NJ

    I did some updating.

    Working Pro since 1993

    Tom M

    #656877
    RonW
    Moderator
    Holladay, Tn

    I picked up the folding out feed tables for my Supermax 19-38 drum sander yesterday.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #656890
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I did some updating.

    Oh that’s nice!! Is that the PLS180?? I have the 180 and love but would love it more if it was green!

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #656904
    TopNotch
    Pro
    elmwood park, NJ

    Yes 180. I The green one wasn’t in stock and was quite a bit more money so I stayed with the red.

    I bought mine if CL several years ago and appears to hold level but the green light doesn’t shut off when out if level. Seems like stuck in fixed mode so No longer trust it.

    Working Pro since 1993

    Tom M

    #656906
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Yes 180.

    Nice!!!
    I just got the UPS My Choice delivery alert It’s my big BF gift to myself.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #656916
    cmeyer25
    Pro
    Bellingham, WA

    Picked up these deep throats the other day. As the saying goes – you can never have enough clamps.

    Never, lol!

    I did some updating.

    That’s a nice couple of upgrades, congrats! I’m looking to upgrade my jig saw too, but I’m hoping to go for a cordless model myself.

    Yes 180.

    Nice!!!
    I just got the UPS My Choice delivery alert It’s my big BF gift to myself.

    That’s exciting – what’d you get???

    Charlie
    __________________

    Instagram

    #656918
    xtsallad
    Pro
    Dallas, TX

    I did some updating.

    Nice gear! Is that barrel grip replacing a top handle? Been curious about using barrel grip vs d handle.

    j

    #656921
    brianpeters
    Pro
    Murray, KY

    This showed up on the FedEx truck today, looking forward to adding them to my toolbelt!Not sure if I’ll use the straight ones much, I generally use red and green to do all my cutting.

    do these differ a lot from the previous generation of milwaukee snips?

    The handles are different, a bit more ergonomic. Also, they fixed the issue of them popping open when you put them in your toolbag, a very much improved latch system! I used them some today, liking them a lot so far.

    #656930
    Doobie
    Moderator

    I did some updating.

    Nice! I prefer barrels, but I can happily use either. Congratz! 👍

    #656933

    I did some updating.

    Congratulations, I hear that those Bosch corded jigsaws are great.

    @DirtyWhiteBoy congrats looking forward to seeing your toys.

Viewing 20 posts - 161 through 180 (of 1,006 total)
  • The topic ‘V-23.0 Toolaholic Public Announcement Page’ is closed to new replies.
queries. 0.924 seconds