dcsimg

TOTD (Tool Of The Day) V 2.0

Viewing 20 posts - 61 through 80 (of 1,011 total)
  • Author
    Posts
  • #662076
    Anonymous
    Inactive

    Will be clearing the 2′ of snow off of my ranch this afternoon, so TOTD will be a shovel and my 10′ Werner 1A fiberglass.

    #662081
    GTokley
    Pro
    Belleville, ON

    My TOTD was my shovel and my ATV with a snowplow. To clear way all that wet snow.

    I used the snowblower. Makes life a lot easier when you can point it where you want it, over the banks that build up. Still a lot of shovel work for corners and steps and such.

    I miss using my snowblower. It quit working. I thought the worm gear when out of it. I started to tear it about and never got back to as spring came. That was few years ago.

    Greg
    Do More of What Makes You Happy

    #662097
    rerun_1965
    Pro
    holladay, TN

    Ridgid multi tool cleaned up sheetrock killer tool

    #662120
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Ridgid multi tool cleaned up sheetrock killer tool

    I use the 12volt JobMax tool ,, that 18volt must be a animal!

    #662141
    xtsallad
    Pro
    Dallas, TX

    My snap blade olfa knives. Hard to say which was more TOTD between the several 9mm and 18mm blade knives. opening hundreds of bubble wrapped mannequin parts for an exhibit.

    j

    #662160
    madman_us
    Pro
    Palm Springs, CA

    Pencil and paper 😀
    drew maps for permits and couple proposals

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #662188
    RonW
    Moderator
    Holladay, Tn

    Ridgid multi tool cleaned up sheetrock killer tool

    I use the 12volt JobMax tool ,, that 18volt must be a animal!

    I got to play with the 18v jobmax a bit yesterday. I really like it. The OMT did very well. Only thing I didn’t care for is it wont stand up. But that would not be a deal breaker.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #662200

    My S K wrenches and my Bosch PS30 and PS40

    #662255
    rerun_1965
    Pro
    holladay, TN
    #662274
    GTokley
    Pro
    Belleville, ON

    Just abit of running around after work today. I went to Lowes, Home Depot & Rona. I didn’t have much luck find weather stripping for exterior door. But I found some at my local Hardware store while was there getting the kids skates sharpening. I didn’t grab any tonight. I will get some on the weekend. Then I came home and shoveled the snow off one of my sheds and the girls rink.

    Greg
    Do More of What Makes You Happy

    #662320
    theamcguy
    Pro
    Fayetteville, NC

    My TOTD was the Bosch Go Screwdriver . Assembled a tool cart from Harbor Freight and with dozens and dozens of screws to tighten this sure made the job easier.

    Automotive Pro
    Fayetteville, NC

    #662398
    Anonymous
    Inactive

    Replacing my water pump this afternoon, these were the TOTD for me.

    #662403
    RonW
    Moderator
    Holladay, Tn

    Got my new Ridgid 8″ tile saw dirty today. I think I’m going to really like this saw.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #662441
    rerun_1965
    Pro
    holladay, TN

    while @RonW was playing with his new saw which is real nice I was playing with my sheetrock mud knife

    #662442
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Only thing I didn’t care for is it wont stand up. But that would not be a deal breaker.

    I find by not standing that tool up it can’t fall down.

    #662454

    Replacing my water pump this afternoon, these were the TOTD for me.

    Oh man D which car / truck you changing that on, the escape?
    Hopefully it’s not brutally cold for you.

    #662458
    Anonymous
    Inactive

    Oh man D which car / truck you changing that on, the escape?
    Hopefully it’s not brutally cold for you.

    A ’95 F150 I brought back from Virginia. Doing it because it’s crazy warm, like 50 here today. You must have had a warmer one there too, I’d guess?

    #662460

    Oh man D which car / truck you changing that on, the escape?
    Hopefully it’s not brutally cold for you.

    A ’95 F150 I brought back from Virginia. Doing it because it’s crazy warm, like 50 here today. You must have had a warmer one there too, I’d guess?

    Yeah, it was definitely milder today,
    I just hope these few days of mild weather melting all the snow around foundations, does not come. Back to bite us in the you know where lol

    #662463
    Anonymous
    Inactive

    I just hope these few days of mild weather melting all the snow around foundations, does not come. Back to bite us in the you know where lol

    Got the areal flood warning on my phone earlier. Shows 1-2″ of rain tomorrow, and a 2nd day of 50+ temps, and we have 2′ on the ground here. So yeah, I would have preferred it stayed cold. Shows you guys in for real cold Sunday, into Monday.

    #662489
    RonW
    Moderator
    Holladay, Tn

    Only thing I didn’t care for is it wont stand up. But that would not be a deal breaker.

    I find by not standing that tool up it can’t fall down.

    This is true.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

Viewing 20 posts - 61 through 80 (of 1,011 total)
  • The topic ‘TOTD (Tool Of The Day) V 2.0’ is closed to new replies.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.245 seconds