dcsimg

Thoughts on the dewalt cordless framing nailer

Viewing 20 posts - 41 through 60 (of 63 total)
  • Author
    Posts
  • #522846
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I once dropped a Grip Rite framing nailer about 30 ft onto concrete. It leaked a little bit but kept firing nails.

    The grip rite is a solid gun. I don’t know why I don’t have the DeWalt framer yet?

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #522874
    ChadM
    Moderator
    East Palestine, Ohio

    I once dropped a Grip Rite framing nailer about 30 ft onto concrete. It leaked a little bit but kept firing nails.

    The grip rite is a solid gun. I don’t know why I don’t have the DeWalt framer yet?

    I’m not sure why I don’t either – it is high on my list. My old Paslode cordless (2005 model) still works but it is pretty finicky any more.

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

    #523141
    theamcguy
    Pro
    Fayetteville, NC

    I’m not sure why I don’t either – it is high on my list.

    All of the info in this thread makes it seem like a very nice gun for framing.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #523533
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I’m not sure why I don’t either – it is high on my list.

    All of the info in this thread makes it seem like a very nice gun for framing.

    From all I’ve heard it is a very good gun for framing. I need to get one.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #523918
    monman1
    Pro

    I’m not sure why I don’t either – it is high on my list.

    All of the info in this thread makes it seem like a very nice gun for framing.

    From all I’ve heard it is a very good gun for framing. I need to get one.

    So far what i have used mine it works great! It has sunk every nail so far.

    Member since April 4, 2014

    doer of all , master of none.

    #523986
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I’m not sure why I don’t either – it is high on my list.

    All of the info in this thread makes it seem like a very nice gun for framing.

    From all I’ve heard it is a very good gun for framing. I need to get one.

    So far what i have used mine it works great! It has sunk every nail so far.

    Are you using it for straight out framing or the go back work?

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #524049
    theamcguy
    Pro
    Fayetteville, NC

    So far what i have used mine it works great! It has sunk every nail so far.

    Joshua good to know coming from a framer.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #524338
    monman1
    Pro

    Are you using it for straight out framing or the go back work?

    Both right now, I shot about 500 nails with it today. And it had its first jam today, the nail hit hit a big knot and bent up in the nose of the gun, i pull the gun off the nail and kept going.

    Member since April 4, 2014

    doer of all , master of none.

    #524340
    Warren6810
    Moderator
    Akron, OH

    I have used it a few times when air was also around. Because of the weight, I really don’t like it for everyday use. Other than that, I have no complaints.

    #524409
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Are you using it for straight out framing or the go back work?

    Both right now, I shot about 500 nails with it today. And it had its first jam today, the nail hit hit a big knot and bent up in the nose of the gun, i pull the gun off the nail and kept going.

    That’s good you didn’t let that bent nail phase you.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #524543
    theamcguy
    Pro
    Fayetteville, NC

    Both right now, I shot about 500 nails with it today. And it had its first jam

    Wow you really put that gun through its paces day after day. Glad to see it really is able to perform under tough conditions.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #530011
    monman1
    Pro

    I put it thru the paces today, i toe nailed all the roof rafters to the wall and some on the hip with it, about 500 3 1/4 nails.

    Member since April 4, 2014

    doer of all , master of none.

    Attachments:
    #530022
    Austin
    Pro
    Covington, KY

    On one battery?

    #530077
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    monman1

    The gun sounds like a winner. That hip is nice and straight. Do you cut your jacks to length, nail to top plate layout and then nail to where it hits the hip? I don’t see a hip layout.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #530180
    RonW
    Moderator
    Holladay, Tn

    I put it thru the paces today, i toe nailed all the roof rafters to the wall and some on the hip with it, about 500 3 1/4 nails.

    Sounds like the gun is working great for you. You have definitely put it to work.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #530181
    theamcguy
    Pro
    Fayetteville, NC

    I put it thru the paces today, i toe nailed all the roof rafters to the wall and some on the hip with it, about 500 3 1/4 nails.

    All on one charge? If so that is pretty good.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #530352
    Warren6810
    Moderator
    Akron, OH

    I believe the specs say 600 per charge. I have never counted, but I would say based on experience, that is pretty accurate.

    #530380
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I put it thru the paces today, i toe nailed all the roof rafters to the wall and some on the hip with it, about 500 3 1/4 nails.

    Sounds like the gun is working great for you. You have definitely put it to work.

    The one thing about the cordless on the building the roof when it’s dropped there’s no hose to slow it down..

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #530448
    monman1
    Pro

    On one battery?

    All on one charge? If so that is pretty good.

    Yes all on one 4 amp battery.

    Do you cut your jacks to length, nail to top plate layout and then nail to where it hits the hip? I don’t see a hip layout.

    Yes we cut the jacks to length, nail it to the wall then to the hip, when the string is in the middle.

    Member since April 4, 2014

    doer of all , master of none.

    #530450
    Warren6810
    Moderator
    Akron, OH

    I put it thru the paces today, i toe nailed all the roof rafters to the wall and some on the hip with it, about 500 3 1/4 nails.

    Sounds like the gun is working great for you. You have definitely put it to work.

    The one thing about the cordless on the building the roof when it’s dropped there’s no hose to slow it down..

    So far, mine has not fallen farther than from a saw horse. Makes me think of devising a little bungee with a clip that could clip onto the users pouch.

Viewing 20 posts - 41 through 60 (of 63 total)
  • You must be logged in to reply to this topic.
queries. 0.564 seconds