dcsimg

Small Outdoor Table

This topic contains 51 replies, has 17 voices, and was last updated by  theamcguy 3 months, 1 week ago.

Viewing 20 posts - 1 through 20 (of 52 total)
  • Author
    Posts
  • #634793

    redwood
    Pro

    I thought I would play around with some ideas that I had and build a small outdoor table for my coffee or whatever next to my chair.

    Here are some border pieces that I cut on the CNC.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634796

    redwood
    Pro

    Here is the top, where the border pieces were used. I also cut the inner circle and the inlaid design on the CNC

    Attachments:

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634798

    redwood
    Pro

    And here are the legs, which were also cut on the CNC.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634802

    Sorpa
    Pro
    Pierrefonds, Qc

    I like it! Cool project.
    Looking forward to seeing it all finished.

    #634803

    Sprokitz
    Pro
    Easton, Pa

    I thought I would play around with some ideas that I had and build a small outdoor table for my coffee or whatever next to my chair.

    Looks like you’re having some fun with your CNC Mark. About how long did it take to cut all the pieces ?

    #634804

    redwood
    Pro

    I thought I would play around with some ideas that I had and build a small outdoor table for my coffee or whatever next to my chair.

    Looks like you’re having some fun with your CNC Mark. About how long did it take to cut all the pieces ?

    Not too long. About a 1/2 hour for the border pieces and a 1/2 hour for the leg pieces. 1/2 of that time is setting up the material and clamping it down.

    But unlike cutting these pieces on a bandsaw or some other method, they are exactly alike and only require minimal sanding with the spindle sander.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634807

    kurt@welkerhomes.com
    Pro
    Owatonna, MN - Minnesota

    Getting pretty good with that CNC Mark, table looks good. it is amazing what you can do with it.

    #634813

    Very nice project Mark. That CNC sure makes it easier. I bet the coffee will taste better too.

    #634815

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    Wow, definitely a time saver, in the finishing aspect,
    And the fact that they are identical to.
    Nice looking little table.
    What type of wood is that.

    #634816

    redwood
    Pro

    Wow, definitely a time saver, in the finishing aspect,
    And the fact that they are identical to.
    Nice looking little table.
    What type of wood is that.

    The majority of the wood is Port Orford Cedar and the outside band on the top is redwood.

    Anyone want to guess what the deer scene is made of?

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634825

    Sprokitz
    Pro
    Easton, Pa

    Anyone want to guess what the deer scene is made of?

    Poplar ?

    #634837

    theamcguy
    Pro
    Fayetteville, NC

    Wow Mark that table looks really nice. Amazing work with that CNC. Very unique table.

    Automotive Pro
    Fayetteville, NC

    #634838

    roninohio
    Pro
    New Franklin, OH

    Nice job Mark! Is it Aspen?

    #634861

    RonW
    Pro
    Holladay, Tn

    Anyone want to guess what the deer scene is made of?

    Looks like Cypress to me.

    Nice work on the table Mark!

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #634872

    cmeyer25
    Pro
    Bellingham, WA

    Here is the top, where the border pieces were used. I also cut the inner circle and the inlaid design on the CNC

    That is a really neat little table – and awesome that you could make all that on a CNC machine!

    Charlie
    __________________

    Instagram

    #634879

    Boschmanbrian
    Pro
    Montreal , QC, Canada

    Wow, definitely a time saver, in the finishing aspect,
    And the fact that they are identical to.
    Nice looking little table.
    What type of wood is that.

    The majority of the wood is Port Orford Cedar and the outside band on the top is redwood.

    Anyone want to guess what the deer scene is made of?

    Thanks, I am definitely not a woodworker, but it definitely looks like nice contrast and you probably know what works best from all your years of deck building,

    Will you seal it or let it weather naturally.

    #634880

    redwood
    Pro

    Will you seal it or let it weather naturally.

    Thanks for all your comments.

    Yes, it will be sealed with a outside deck sealer.

    You guys are off, I think with the inlay a bit. The top is Port Orford Cedar, the band is redwood, and the inlay is a brown colored epoxy putty.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634882

    RonW
    Pro
    Holladay, Tn

    You guys are off, I think with the inlay a bit. The top is Port Orford Cedar, the band is redwood, and the inlay is a brown colored epoxy putty.

    I was not off Mark. Think I nailed in…lol
    Wikipedia Says Chamaecyparis lawsoniana, known as Port Orford cedar or Lawson cypress, is a species of conifer in the genus Chamaecyparis, family Cupressaceae.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #634883

    redwood
    Pro

    Yes Ron, you are right about the top, but the inlay itself, which is what I was asking, is epoxy putty. Kind of a trick question.

    Mark E.

    Pioneer, CA

    Working Pro 1972 - 2015
    Member since Jan 22, 2013
    www.creative-redwood-designs.com

    #634906

    RonW
    Pro
    Holladay, Tn

    Yes Ron, you are right about the top, but the inlay itself, which is what I was asking, is epoxy putty. Kind of a trick question.

    Oh Ok, Yep I was way off then!
    Lets hear a little more on this epoxy putty. Don’t think I have used it before.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

Viewing 20 posts - 1 through 20 (of 52 total)

You must be logged in to reply to this topic.

queries. 0.809 seconds