dcsimg

Show us your hand held toolbox

Viewing 20 posts - 1 through 20 (of 110 total)
  • Author
    Posts
  • #441096
    Rovik
    Pro

    This is my toolbox i use in my home. My plan was to use a L-boxx 4 with wood organiser, but since the box is to small to house a decent level and a handsaw i bought this box instead.

    What kind of toolbox do you guys use?

    Norway

    #441103
    utopia78
    Pro
    Toronto, ON

    I like the diamond plate on that toolbox @rovik!

    I normally bring my tools to the site in Bosch L-Boxx’s then transfer what I need each day to my Kunny’s tool bag that I take on the stage.

    A Working Pro since 2004

    #441109
    theamcguy
    Pro
    Fayetteville, NC

    This is my toolbox i use in my home.

    Rovik, nice tool box. Did you add the diamond plate?

    Automotive Pro
    Fayetteville, NC

    #441111
    58Chev
    Pro
    Etobicoke, ON

    @Rovik,
    Nice tool box, I’ll have to grab a few pic’s later. They are buried in the basement.

    I see a Wera driver in there, do you know what model no. it is?

    “If you don’t pass on the knowledge you have to others, it dies with you”
    — Glenn Botting

    #441122
    Rovik
    Pro

    This is my toolbox i use in my home.

    Rovik, nice tool box. Did you add the diamond plate?

    Thanks, the diamond plate came with the box.



    @58chev
    , it is a wera kk 28

    Norway

    Attachments:
    #441156
    smallerstick
    Pro
    North Bay, ON

    This is my toolbox i use in my home. My plan was to use a L-boxx 4 with wood organiser, but since the box is to small to house a decent level and a handsaw i bought this box instead.

    What kind of toolbox do you guys use?

    C’mon that can’t be a toolbox that gets daily use. Where is the dust and debris?
    Just kidding, that’s a good looking rig, love the diamond plate!

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #441160
    RonW
    Moderator
    Holladay, Tn

    This is my toolbox i use in my home. My plan was to use a L-boxx 4 with wood organiser, but since the box is to small to house a decent level and a handsaw i bought this box instead.

    What kind of toolbox do you guys use?

    C’mon that can’t be a toolbox that gets daily use. Where is the dust and debris?
    Just kidding, that’s a good looking rig, love the diamond plate!

    Heck even when brand new my boxes don’t look that clean. lol
    It doesn’t even look like the tools have been used.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #441161
    r-ice
    Pro
    Durham region, ON

    wow that looks very nice, i don’t have a handheld tool box. Eventually I would like to split some tools into one so I can have one to bring around when someone asks me to come help them tighten or loosen something.

    #441188
    theamcguy
    Pro
    Fayetteville, NC

    Rovik, who made that box and do you know the model number?

    Automotive Pro
    Fayetteville, NC

    #441217
    Rovik
    Pro

    Rovik, who made that box and do you know the model number?

    It looks like this one i think: http://www.13deals.com/store/products/26730-tough-stuff-26-toolbox-w-removable-tray

    It’s not a pro brand, but i think it will hold up well. As you can see in my second picture in this thread, I have put metal Latches on the sides for extra strengt.

    Norway

    #441239
    thedude306
    Moderator
    Foam Lake, SK

    some of us just like to keep our tools clean. (especially when we snap a picture)

    I have a dewalt case and some off brand boxes. I also have a bag that turns into a disaster. I’ll get some pictures later.

    Brad T
    Self employed Pro since 2014!!

    #441242
    58Chev
    Pro
    Etobicoke, ON

    Got a few that reside in my basement. Mostly all spare tools of what is in my garage except for the plumbing tools.

    This small old tackle box houses all my plumbing tools.

    This long blue one I inherited from my dad when he passed a number of years ago.

    This Blue steel box I was my first tool box purchase back in the early eighties.

    And I also have a couple of bucket buddies that have other tools in.

    “If you don’t pass on the knowledge you have to others, it dies with you”
    — Glenn Botting

    #441274
    Rovik
    Pro

    @58chev, you have a nice collection of toolboxes there.

    Norway

    #441307
    Doobie
    Moderator

    Here’s my main tool bucket buddy, my electrical tote, and my newly set up sheet metal/tin work tote.

    #441320
    smallerstick
    Pro
    North Bay, ON

    This one was my “go-to” box for a number of years when I didn’t have a shop. It still lives under my workbench.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #441326
    Seven-Delta-FortyOne
    Pro
    The Emerald Triangle, Northern California

    I have a bunch.

    I have a couple of CLC open top carriers, 1 for plumbing, 1 for electrical, etc.

    I have a homemade wood box for masonry tools. I needed something a little more rugged for using in the dirt.

    I have a couple other random bags, mostly CLC, for each different trade, like one for tile, one for drywall.

    It would have been so much easier if I had just stuck to one trade, but no, I had to go and try to do them all….:rolleyes:

    Maybe I’ll snap some pics here soon.

    Delta

    Goin' Down In Flames........

    #441327
    theamcguy
    Pro
    Fayetteville, NC

    Peter that is a real nice box you made.

    Automotive Pro
    Fayetteville, NC

    #441359
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I’ve been doing my trim work out of a CLC bad lately

    #441395
    theamcguy
    Pro
    Fayetteville, NC

    I’ve been doing my trim work out of a CLC bag lately

    Is that the bag with the removable tray?

    Automotive Pro
    Fayetteville, NC

    #441446
    ChadM
    Moderator
    Rogers, Ohio

    It would have been so much easier if I had just stuck to one trade, but no, I had to go and try to do them all….:rolleyes:

    I know what you mean…I have a tool box/bag for electrical tools, 2 for plumbing tools, drywall, painting, masonry, hvac, roofing, several for carpentry tools….

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

Viewing 20 posts - 1 through 20 (of 110 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.385 seconds