You are here: Home > Topics > Power Tools, Pneumatic Tools, Hand Tools and All Things Tools > Routers, Router Tables and Router Bits > Router Bits and Other Accessories > Router Jig for use on Guide Rail Router Jig for use on Guide Rail This topic contains 11 replies, has 9 voices, and was last updated by ChadM 5 years, 5 months ago. Viewing 12 posts - 1 through 12 (of 12 total) Author Posts March 1, 2014 at 1:20 am #96615 MrToolJunkiePro I thought this jig was cool and pretty easy to make. Orange County, CA March 1, 2014 at 7:50 am #96676 supimeisterPro Thanks for this video Scot… I wish there were some descriptions in english but this is super helpful. Are you planning to make it? John S March 1, 2014 at 9:07 am #96721 firstname.lastname@example.orgPro Owatonna, MN - Minnesota you did not understand that John, nor I . it does look like a nice setup however. March 1, 2014 at 9:10 am #96723 supimeisterPro email@example.com wrote: you did not understand that John, nor I . it does look like a nice setup however. hahah yes but in terms of creative ideas it is really interesting and helpful for spurring more ideas in my mind. John S March 1, 2014 at 1:33 pm #96845 mattryycPro Calgary, Alberta Great idea, and a lot cheaper than a micro fence. I might tackle this one actually, it would be great for dados and the like. March 1, 2014 at 2:09 pm #96856 thedude306Moderator Foam Lake, SK This would be a great addition to my table. Saved for reference Brad T Self employed Pro since 2014!! March 1, 2014 at 5:41 pm #96893 MrToolJunkiePro I am tempted to try it…looks pretty straight forward. Orange County, CA March 2, 2014 at 12:09 am #96999 DirtyWhiteBoyPro Honolulu,, Hi. Looks easy to make, I like easy. Dirty A Working Pro since 1988! Member since January 26, 2013. March 2, 2014 at 7:37 am #97052 supimeisterPro MrToolJunkie wrote: I am tempted to try it…looks pretty straight forward. If you do do it, I am sure you will share your insights gleaned – and help the rest of us out as we try to imitate your imitation 😛 John S March 2, 2014 at 5:36 pm #97305 MKE_VoltageModerator Saint Francis, WI Great little jig, if you have a $800 Festool router it has a built in track groove. This jig would work very well for my router since its tough to use it with a straightedge. March 2, 2014 at 8:44 pm #97373 kzcarpPro Interesting Bosch tablesaw with sliding table used in the first 15 seconds of the video. kevin March 2, 2014 at 8:52 pm #97376 ChadMModerator East Palestine, Ohio Does anybody use the EZ Smart router system? I just seen this product the other day – it looks like a sweet set up. http://www.eurekazone.com/routing_grooving_tools_s/1904.htm Chad A Working Pro since 1993 Member since 12/07/2013 Author Posts Viewing 12 posts - 1 through 12 (of 12 total) You must be logged in to reply to this topic.