dcsimg

Recording Studio Workstation

Viewing 20 posts - 1 through 20 (of 21 total)
  • Author
    Posts
  • #478966
    JamieM
    Pro
    Hamilton, ON

    A few photos of a custom workstation I designed and built for a recording and voice over studio in Toronto. The digital audio board in the middle weighs in at 75 lbs. let alone all of the other equipment they managed to fill it with.

    #478970
    madman_us
    Pro
    Palm Springs, CA

    great job on that workstation JamieM.
    And it looks like you did find the way back to BTP 😛
    (just looked at your profile)

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

    #478983
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Man that came out beautiful. That looks like a heck of a sound system. You should be proud of that one.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #479018
    r-ice
    Pro
    Durham region, ON

    that looks pretty impressive, i like the way it looks, what kind of finish did you use on it as the front area is going to get alot of touching when they work on it.

    #479037
    58Chev
    Pro
    Etobicoke, ON

    A few photos of a custom workstation I designed and built for a recording and voice over studio in Toronto. The digital audio board in the middle weighs in at 75 lbs. let alone all of the other equipment they managed to fill it with.



    @JamieM
    ,
    That looks nice and beefy. Not going anywhere. Where in TO is this studio?

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #479148

    Studio/control room builds are so cool. They come with their own unique parameters and challenges. Nice job.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #479154

    Very nice work! Looks challenging and fun at the same time.

    #479155
    roninohio
    Pro
    New Franklin, OH

    That is a nice job! I bet there are a million wires under all that?

    #479164
    jponto07
    Moderator
    Bloomington, IN

    Nice work! Is it made from birch?

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #479174

    Nice work! Is it made from birch?

    That’s what i was going ask . Most be like 100lbs of equipment there .

    Always willing to learn .

    #479210
    JamieM
    Pro
    Hamilton, ON

    @madman_us,

    Yes it has been awhile since I posted but it’s good to be back and chatting with everyone again!

    #479213
    JamieM
    Pro
    Hamilton, ON

    r-ice



    @r-ice
    ,
    The stain is an aniline dye, then 3 coats on each side of a pre-cat lacquer. Everything was sprayed using a HVLP system. The pre-cat lacquer is very durable, great for any type of work surface.

    #479214
    JamieM
    Pro
    Hamilton, ON

    A few photos of a custom workstation I designed and built for a recording and voice over studio in Toronto. The digital audio board in the middle weighs in at 75 lbs. let alone all of the other equipment they managed to fill it with.

    @JamieM,
    That looks nice and beefy. Not going anywhere. Where in TO is this studio?



    @58Chev
    ,

    The studio is on Carlaw Ave. There are many studios on that street and in that area.

    #479216
    JamieM
    Pro
    Hamilton, ON

    Nice work! Is it made from birch?



    @jponto07
    ,

    It was all made from 3/4” maply ply and some hardwood maple.

    #479217
    jponto07
    Moderator
    Bloomington, IN

    Dang it..I almost said maple too! Either way, it look very nice.

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #479219
    JamieM
    Pro
    Hamilton, ON

    Studio/control room builds are so cool. They come with their own unique parameters and challenges. Nice job.



    @JimDaddyO
    ,

    Thanks. Doing this type of work is very different than building for a kitchen, or even household furniture. The size and weight of equipment is a huge factor, then you add the fact everyone has different ways of wanting their equipment to be installed based on their working habits. Finally, you have to make these tanks look stylish and a focal point in the room.

    #479225
    JamieM
    Pro
    Hamilton, ON

    That is a nice job! I bet there are a million wires under all that?



    @roninohio
    ,

    There are so many wires behind these desks, it crazy! But we install pathways and cable ports for all the cables to run from one end of the desk to the other, so once all the equipment and cables are installed, they all get velcro strapped to the pathways. It makes a HUGE difference, more so when they have to trace a dead cable! lol

    #479257

    Nice job and good point about future accessibility. The same thought process should be applied to entertainment centers and media cabinetry in homes.

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #479578
    theamcguy
    Pro
    Fayetteville, NC

    A few photos of a custom workstation I designed

    Fantastic work. Looks great.

    Automotive Pro
    Fayetteville, NC
    (and also the World's Fastest Poster)

    #479584
    RonW
    Moderator
    Holladay, Tn

    Nice work on the cabinet. The finish work looks top notch.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

Viewing 20 posts - 1 through 20 (of 21 total)
  • You must be logged in to reply to this topic.
queries. 0.478 seconds