dcsimg

PSA

Viewing 20 posts - 861 through 880 (of 910 total)
  • Author
    Posts
  • #581845
    utopia78
    Pro
    Toronto, ON

    Hearing loss from work can be devastating later in life. Here in Ontario I’ve been hearing a lot of blitzes by the MOL on job sites and they have been pushing it through the newsletter.

    Take care of your ears!

    A Working Pro since 2004

    #582360
    r-ice
    Pro
    Durham region, ON

    this couldve gone alot worse
    https://gfycat.com/ShortCleverArawana

    #582365

    this couldve gone alot worse
    https://gfycat.com/ShortCleverArawana

    Oh man, it was pretty funny how it just flew him over, but he’s very lucky he didn’t get to badly injured,

    #582462
    r-ice
    Pro
    Durham region, ON

    this couldve gone alot worse
    https://gfycat.com/ShortCleverArawana

    Oh man, it was pretty funny how it just flew him over, but he’s very lucky he didn’t get to badly injured,

    I think he is lucky he didn’t go flying off the roof. that would’ve been a disaster.

    #588503
    r-ice
    Pro
    Durham region, ON

    This guy could probably use Woodman_412 ‘s rooftop idea

    Attachments:
    #594151
    smallerstick
    Pro
    North Bay, ON

    I watched this again today and thought it’s worth sharing. I know I have quite a few wonky boards that I want to use but haven’t known until now how to go about working them safely.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #594164
    JimDaddyO
    Pro
    Wawa, ON

    I watched this again today and thought it’s worth sharing. I know I have quite a few wonky boards that I want to use but haven’t known until now how to go about working them safely.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/PEtL-lFLmcI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    That worked out well. I would have never thought of it. I usually use a hand plane, but my jointer is only 4″, so not much use for stock of any size.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #594165

    I watched this again today and thought it’s worth sharing. I know I have quite a few wonky boards that I want to use but haven’t known until now how to go about working them safely.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/PEtL-lFLmcI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    That particular piece is fit for the burn pile

    #594196

    I watched this again today and thought it’s worth sharing. I know I have quite a few wonky boards that I want to use but haven’t known until now how to go about working them safely.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/PEtL-lFLmcI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Wow, I would have never thought about saving that piece, great job on saving the lumber.
    It actually didn’t take that long either.
    Thanks for that video Peter,
    I learned something new.

    #594261
    58Chev
    Pro
    Etobicoke, ON

    I watched this again today and thought it’s worth sharing. I know I have quite a few wonky boards that I want to use but haven’t known until now how to go about working them safely.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/PEtL-lFLmcI?feature=oembed&wmode=opaque” frameborder=”0″ allowfullscreen=””></iframe></figure>

    That particular piece is fit for the burn pile

    Most likely that’s where it would have ended up in shop also.

    What I’d like to know is, how did he get the 60GAL compressor up on the stand? It has given me something to think about and maybe some storage space underneath.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #594281
    r-ice
    Pro
    Durham region, ON

    A good idea to have a helper or have it braced so it doesn’t do this.

    View post on imgur.com

    #594286

    @r-ice wow, that looked brutal, she really smacked her face / head

    I am sure it doesn’t have good rubber feet / stops, probably hard plastic type,
    Get the right ladder for the job, and yes a helper to support the base

    #594386
    58Chev
    Pro
    Etobicoke, ON

    A good idea to have a helper or have it braced so it doesn’t do this.

    <figure class=”oe-video-container”>
    <iframe allowfullscreen=”true” mozallowfullscreen=”true” webkitallowfullscreen=”true” class=”imgur-embed-iframe-pub imgur-embed-iframe-pub-XRa5kfG-true-300″ scrolling=”no” src=”http://imgur.com/XRa5kfG/embed?ref=http%3A%2F%2Fbethepro.com%2Fforums%2Ftopic%2Fpsa%2Fpage%2F44%2F&w=300&#8243; id=”imgur-embed-iframe-pub-XRa5kfG” style=”height: 500px; width: 300px; margin: 10px 0px; padding: 0px;”></iframe>
    <script async=”” src=”//s.imgur.com/min/embed.js” charset=”utf-8″></script>
    </figure>

    Ouch, even worse looking on imgur. You seem the full impact of the drop and faceplant

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #594525
    theamcguy
    Pro
    Fayetteville, NC

    Ooo that was painful. Ladder safety is a must.

    Automotive Pro
    Fayetteville, NC

    #594576
    RonW
    Moderator
    Holladay, Tn

    A good idea to have a helper or have it braced so it doesn’t do this.

    Oh man she hit hard.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #594752
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    A good idea to have a helper or have it braced so it doesn’t do this.

    Oh man she hit hard.

    Face plant!!!

    #596363
    smallerstick
    Pro
    North Bay, ON

    This is a move that is long overdue; a proposed total ban on the use of asbestos in Canada.

    http://www.cbc.ca/news/canada/ottawa/asbestos-ban-imports-1.3890165

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #596375
    r-ice
    Pro
    Durham region, ON

    This is a move that is long overdue; a proposed total ban on the use of asbestos in Canada.

    http://www.cbc.ca/news/canada/ottawa/asbestos-ban-imports-1.3890165

    wait what? they still use asbestos? i thought they were banned ages ago

    #596379

    This is a move that is long overdue; a proposed total ban on the use of asbestos in Canada.

    http://www.cbc.ca/news/canada/ottawa/asbestos-ban-imports-1.3890165

    That’s great news, we still have a few pipes at work, we have a team in right now removing all the pipes and disposing of them. We also have a plate that we currently using in glass blowing, I have brought it to the attention of csst health and safety at the shop, hopefully they will remove it in the next few weeks.

    Thanks for the article Peter, I am relaying it to me representative in our department

    #596384
    58Chev
    Pro
    Etobicoke, ON

    This is a move that is long overdue; a proposed total ban on the use of asbestos in Canada.

    http://www.cbc.ca/news/canada/ottawa/asbestos-ban-imports-1.3890165

    I am shocked that we are still importing this crap. I too thought it was completely banned years ago.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

Viewing 20 posts - 861 through 880 (of 910 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.744 seconds