dcsimg

PSA

Viewing 20 posts - 261 through 280 (of 910 total)
  • Author
    Posts
  • #417463
    utopia78
    Pro
    Toronto, ON

    Really lucky he didn’t break his leg or maybe he did?

    A Working Pro since 2004

    #417476
    58Chev
    Pro
    Etobicoke, ON

    @r-ice,
    That one has been around for a while.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #417978
    r-ice
    Pro
    Durham region, ON

    @r-ice,
    That one has been around for a while.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/5aVWkk4K_HQ?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    didn’t know about that, it was the first i’ve seen it. I was cringing as soon as I saw him try to use his body weight to try and stop the lathe chuck. I don’t know what he was thinking or maybe he thought he could stop it because he went to the gym alot or something. What I wanted to know was where the teacher was, you can’t leave a room full of teenagers and not expect something like that to happen.

    #418032
    58Chev
    Pro
    Etobicoke, ON

    @r-ice,
    That one has been around for a while.

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/5aVWkk4K_HQ?feature=oembed&wmode=opaque” frameborder=”0″ allowfullscreen=””></iframe></figure>

    didn’t know about that, it was the first i’ve seen it. I was cringing as soon as I saw him try to use his body weight to try and stop the lathe chuck. I don’t know what he was thinking or maybe he thought he could stop it because he went to the gym alot or something. What I wanted to know was where the teacher was, you can’t leave a room full of teenagers and not expect something like that to happen.

    Yea, that one with the student trying to loosen the chuck has been on automotive forums for a few years now.

    This is why you should never wear loose clothing while working on machines.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #418172
    Lakelover
    Pro
    Fort Qu'Appelle, SK

    This is why you should never wear loose clothing while working on machines.

    That was grizzly, over in 0.5 seconds. I wonder what injuries he got from that ?

    #418540
    utopia78
    Pro
    Toronto, ON

    This is why I don’t stand in front of people swinging a sledge.

    A Working Pro since 2004

    #418580
    58Chev
    Pro
    Etobicoke, ON

    This is why I don’t stand in front of people swinging a sledge.

    Too Funny, I’ve many a sledge and always make sure the head is wedged on tight. Especially my long sledges.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #418778
    58Chev
    Pro
    Etobicoke, ON

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #418790
    jzmtl
    Pro
    Montreal, QC

    This is why I don’t stand in front of people swinging a sledge.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/myc4aJSQXFg?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Or hold whatever the guy is hammering with your hands. A friend did that and got nailed on his thumb.

    #419065
    r-ice
    Pro
    Durham region, ON

    This is why I don’t stand in front of people swinging a sledge.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/myc4aJSQXFg?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    HOLY crap, that is nuts. Good thing they had that ply there blocking the patch, imagine if they had to explain to the homeowner why there is a hole in their rear door. Or a broken leg.

    #419135
    theamcguy
    Pro
    Fayetteville, NC

    Looks to me like the sledge hammer handle just broke on the edge of the concrete.

    Automotive Pro
    Fayetteville, NC

    #419145
    58Chev
    Pro
    Etobicoke, ON

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #419300
    jzmtl
    Pro
    Montreal, QC

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/trjFkeS9vxk?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Lol, I already knew what’s gonna happen just from the 1st frame of video. Common sense is really lacking in some people eh?

    #419665
    r-ice
    Pro
    Durham region, ON

    You really gotta pay attention when working with lathes

    #419695
    58Chev
    Pro
    Etobicoke, ON

    You really gotta pay attention when working with lathes



    @r-ice
    ,
    You another one I’m gonna have to call Sergey?

    that one is 9 posts ^^^^^ LOL

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #419707
    r-ice
    Pro
    Durham region, ON

    You really gotta pay attention when working with lathes

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/N9grSq-TWMQ?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    @r-ice,
    You another one I’m gonna have to call Sergey?

    that one is 9 posts ^^^^^ LOL

    for some odd reason I thought this one was different. I thought you had posted this one.

    #419710
    58Chev
    Pro
    Etobicoke, ON

    You really gotta pay attention when working with lathes

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/N9grSq-TWMQ?feature=oembed&wmode=opaque” frameborder=”0″ allowfullscreen=””></iframe></figure>

    @r-ice,
    You another one I’m gonna have to call Sergey?

    that one is 9 posts ^^^^^ LOL

    for some odd reason I thought this one was different. I thought you had posted this one.

    Same video just someone reversed it.
    Even the lettering is backwards. LOL

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #419713
    JimDaddyO
    Pro
    Wawa, ON

    You really gotta pay attention when working with lathes

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/N9grSq-TWMQ?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    @r-ice,
    You another one I’m gonna have to call Sergey?

    that one is 9 posts ^^^^^ LOL

    I took long enough (and enough people too) for someone to think of loosening the chuck.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #419726
    r-ice
    Pro
    Durham region, ON

    I was going to say why does everybody seem to be working on the same type of products

    #419774
    58Chev
    Pro
    Etobicoke, ON

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

Viewing 20 posts - 261 through 280 (of 910 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.901 seconds