dcsimg

PSA

Viewing 20 posts - 241 through 260 (of 910 total)
  • Author
    Posts
  • #416276
    JimDaddyO
    Pro
    Wawa, ON

    Here is a tip I just picked up. I like it a lot.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #416283
    58Chev
    Pro
    Etobicoke, ON

    Extension Cord Outlet…

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #416328
    JimDaddyO
    Pro
    Wawa, ON

    Extension Cord Outlet…

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/9uI0DbJq7eI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Well, I don’t care who you are…that there is funny!

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #416331

    Extension Cord Outlet…

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/9uI0DbJq7eI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Wow. Not the fault of the extension cord outlet though….

    #416555
    r-ice
    Pro
    Durham region, ON

    Here this video is why I am super careful on my table saw.

    #416558
    utopia78
    Pro
    Toronto, ON

    Extension Cord Outlet…

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/9uI0DbJq7eI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Man, you would think after the first shock he would check it out before trying again. lol

    A Working Pro since 2004

    #416570
    58Chev
    Pro
    Etobicoke, ON

    Here this video is why I am super careful on my table saw.

    That guy is an ID10T, who in their right mind stands to the side to cut a piece of wood?

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #416587

    Here this video is why I am super careful on my table saw.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/u7sRrC2Jpp4?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    That guy is an ID10T, who in their right mind stands to the side to cut a piece of wood?

    He almost cut up his hand to show what not to do. That could have had an ugly finish for him.

    #416601
    smallerstick
    Pro
    North Bay, ON

    Extension Cord Outlet…

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/9uI0DbJq7eI?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Funny stuff. He keeps trying to plug it in! LoL and then posts the video of his stupidity.

    Here this video is why I am super careful on my table saw.

    I think we all understand the hazards of the TS. I wonder why he felt the need to place himself in harms way for the sake of a demo.

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #416605
    smallerstick
    Pro
    North Bay, ON

    Here is a tip I just picked up. I like it a lot.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/BZ-d1MdbQI8?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Jim, that’s a great idea from Ray. I have used straight methyl hydrate before to remove pine pitch and spruce gum especially but it’s messy and really hard to work with. The gel hand cleaner is a huge improvement; easy to work with and much less mess.

    Thanks for that tip!

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #416608
    58Chev
    Pro
    Etobicoke, ON

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #416631
    JimDaddyO
    Pro
    Wawa, ON

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/wal2KP1bbIY?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Every once in a while you also will come across an odd ball situation. Here is one to think about that happened to me.

    I was working at a transport company as a mechanic right out of high school. On one job we were repairing the inside of a dump box. Grinding and welding in some new metal. I was doing the grinding, while another guy was welding. I needed to go get something so I hopped down, using my hand on the floor of the box to stabilize my descent. As soon as my feet hit the damp concrete floor I got hit with the voltage of the welder grounding through me, instead of the ground cable. My momentum kept me going and the hit was only for a fraction of a second, but it really hurts when every muscle in your body contracts at once. I was sore for a few days, and lucky my young heart was strong.

    My You Tube channel: https://www.youtube.com/channel/UCA5AretE3xPoVDV61AxUdUA

    I don't do a fast job. I don't do a slow job. I do a half fast job.

    #416660
    58Chev
    Pro
    Etobicoke, ON

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/wal2KP1bbIY?feature=oembed&wmode=opaque” frameborder=”0″ allowfullscreen=””></iframe></figure>

    Every once in a while you also will come across an odd ball situation. Here is one to think about that happened to me.

    I was working at a transport company as a mechanic right out of high school. On one job we were repairing the inside of a dump box. Grinding and welding in some new metal. I was doing the grinding, while another guy was welding. I needed to go get something so I hopped down, using my hand on the floor of the box to stabilize my descent. As soon as my feet hit the damp concrete floor I got hit with the voltage of the welder grounding through me, instead of the ground cable. My momentum kept me going and the hit was only for a fraction of a second, but it really hurts when every muscle in your body contracts at once. I was sore for a few days, and lucky my young heart was strong.

    OUCH.. It’s one thing to get shocked but to have the shock travel through your body can be dangerous.

    I would not have thought of the grounding continuing through till you jumped off. Good to know, even though my welding is done with two feet on the ground already.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #416664

    <figure class=”oe-video-container”><iframe width=”770″ height=”578″ src=”https://www.youtube.com/embed/wal2KP1bbIY?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    Great video Frank, we have been trained for lock out, have our locks and badge that goes with the locks, and I have to call security every day for a hot work permit. Plus all the safety equipment.



    @JimDaddyO
    , wow some experience, thank God you were okay.

    #416745
    jzmtl
    Pro
    Montreal, QC

    Here this video is why I am super careful on my table saw.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/u7sRrC2Jpp4?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    That’s why i prefer sticks over blocks, keep my hands far away from the blade.

    #416776

    Here this video is why I am super careful on my table saw.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/u7sRrC2Jpp4?feature=oembed&wmode=opaque” frameborder=”0″ allowfullscreen=””></iframe></figure>

    That’s why i prefer sticks over blocks, keep my hands far away from the blade.

    That’s a very good point. His hand came extremely close. I think this is why I’m leaning more to a track saw.

    #416814
    jzmtl
    Pro
    Montreal, QC

    That’s a very good point. His hand came extremely close. I think this is why I’m leaning more to a track saw.

    Still can’t beat a TS for versatility though, especially if you need sizes other than the standard dimensional lumber.

    #416950
    r-ice
    Pro
    Durham region, ON

    Here this video is why I am super careful on my table saw.

    <figure class=”oe-video-container”><iframe width=”770″ height=”433″ src=”https://www.youtube.com/embed/u7sRrC2Jpp4?feature=oembed&wmode=opaque&#8221; frameborder=”0″ allowfullscreen=””></iframe></figure>

    That guy is an ID10T, who in their right mind stands to the side to cut a piece of wood?

    yah he was trying to show what not to do and it nearly became a really scary video.

    #416974
    58Chev
    Pro
    Etobicoke, ON

    I for one use a harness when having to service AP on the ceiling on our warehouse. Our lanyard is nothing like the one in this video.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #417457
    r-ice
    Pro
    Durham region, ON

    Here there doesn’t need any explanation other than, don’t do this. why would you do this. where is the teacher?

Viewing 20 posts - 241 through 260 (of 910 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 1.365 seconds