dcsimg

New here from Etobi

Viewing 20 posts - 1 through 20 (of 28 total)
  • Author
    Posts
  • #335072
    58Chev
    Pro
    Etobicoke, ON

    Hello all,
    Just joined up. Been known to swing a hammer and use other tools around the house and garage.

    Raised sub-floor in the basement, with laminate on top.

    Small hardwood install I did at my sister in laws place.

    Over time, I insulated all the bedrooms in my home.

    Before building a garage, I installed a 5″ lift kit on my old XJ in the driveway.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335078
    58Chev
    Pro
    Etobicoke, ON

    I spend a bit more time in the garage these days…

    From this greasy/oily rundown engine

    to this freshly painted, put back together

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335079
    Anonymous
    Inactive

    Welcome to BTP, @58Chev!

    #335080
    cranbrook2
    Pro
    Belgrave, Ontario , Canada

    Welcome to BTP Frank ! Great to see pictures right off the bat 🙂

    #335081
    r-ice
    Pro
    Durham region, ON

    here is the guy that taught me everything i know about renos, now I just need to learn about cars from him.

    #335083
    Doobie
    Moderator

    Welcome to the forum Frank!

    just saw that engine in your avatar earlier tonite actually posted by your son-in-law here.

    #335084
    RonW
    Moderator
    Holladay, Tn

    Welcome to BTP 58Chev.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #335085
    58Chev
    Pro
    Etobicoke, ON

    Welcome to BTP Frank ! Great to see pictures right off the bat :-)

    I know my way around forums, and one thing that never changes is, EVERYONE wants to see pictures. 🙂

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335089
    58Chev
    Pro
    Etobicoke, ON

    here is the guy that taught me everything i know about renos, now I just need to learn about cars from him.

    Let’s get that truck of yours up on jack stands and start wrenching on it.. hehe

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335091
    58Chev
    Pro
    Etobicoke, ON

    Welcome to the forum Frank!

    just saw that engine in your avatar earlier tonite actually posted by your son-in-law here.

    AH you edited your post …..:(

    Related only through marriage. LOL

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335092
    Sprokitz
    Pro
    Eastern shore of, Pa

    Welcome aboard Frank

    #335093
    ChadM
    Moderator
    East Palestine, Ohio

    Welcome to BTP @58chev!

    Chad

    A Working Pro since 1993

    Member since 12/07/2013

    #335099
    TonyG
    Pro
    Colorado Springs, CO

    Welcome to BTP looking forward to all your input.

    #335101
    58Chev
    Pro
    Etobicoke, ON

    ThanX for all the welcomes, Folks.. 🙂

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335102
    jponto07
    Moderator
    Bloomington, IN

    Welcome Frank!

    Jon P.
    Timber Carpentry & Construction
    https://www.facebook.com/timbercarpentry/
    Instagram

    #335108
    KenW
    Pro

    Welcome to BTP Frank

    #335110
    kswiss
    Pro
    edmonton, AB

    Welcome to BTP I’m sure you’ll fit in just fine here.

    #335119
    r-ice
    Pro
    Durham region, ON

    Welcome to the forum Frank!

    just saw that engine in your avatar earlier tonite actually posted by your son-in-law here.

    Lol wasn’t sure if he was joining so I said I’m posting the engine pic as it looked really cool on the stand.

    #335120
    58Chev
    Pro
    Etobicoke, ON

    Welcome to the forum Frank!

    just saw that engine in your avatar earlier tonite actually posted by your son-in-law here.

    Lol wasn’t sure if he was joining so I said I’m posting the engine pic as it looked really cool on the stand.

    You just wish you had that engine in your Chevy truck instead of the 4.3l. LOL

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #335169
    Jummul
    Pro

    Very nice projects to see, I love you’ve taken pictures of all of them.

Viewing 20 posts - 1 through 20 (of 28 total)
  • You must be logged in to reply to this topic.
queries. 0.453 seconds