dcsimg

L-Boxx 1 Storage and Organization

Viewing 2 posts - 201 through 202 (of 202 total)
  • Author
    Posts
  • #694076
    Miamicuse
    Pro
    Fort Lauderdale, Florida

    Curious, the L-boxx 1 specs said it is 4.5″ high (external height).

    My angle grinder is 4″ tall when resting horizontally, not sideways. Any chance the lid will close completely or it will most likely interfere with the contours on the inside of the top lid?

    I can check it out for you. So just laying it in the boxx, onto the guard?
    the indent of the handle might be a problem.
    I had the same problem when I wanted to place the 18V floodlight into it.

    Yes, laying the grinder down just like you are grinding (not cutting), with the wheel guard on. My measurement shows a height of 4”. If the door handle indent is significant then it may not work unless I can move the grinder to one side where the lid has no indent. I do not intend to use any foam.

    Thank you so very much!

    #694663
    madman_us
    Pro
    Palm Springs, CA

    Curious, the L-boxx 1 specs said it is 4.5″ high (external height).

    My angle grinder is 4″ tall when resting horizontally, not sideways. Any chance the lid will close completely or it will most likely interfere with the contours on the inside of the top lid?

    I can check it out for you. So just laying it in the boxx, onto the guard?
    the indent of the handle might be a problem.
    I had the same problem when I wanted to place the 18V floodlight into it.

    Yes, laying the grinder down just like you are grinding (not cutting), with the wheel guard on. My measurement shows a height of 4”. If the door handle indent is significant then it may not work unless I can move the grinder to one side where the lid has no indent. I do not intend to use any foam.

    Thank you so very much!

    Got it. I will check tmw or sunday when I am in the shop

    "If you're going to do something, do it right the first time"
    -----------------------------------------------------------------------
    Instagram
    -----------------------------------------------------------------------
    Palm Springs, CA

Viewing 2 posts - 201 through 202 (of 202 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.410 seconds