dcsimg

Built in project

Viewing 14 posts - 41 through 54 (of 54 total)
  • Author
    Posts
  • #278228

    Cool project. I have some built ins around my fireplace in my walkout basement. I need to replace them. I like to see how other people have done it for inspiration. Good work Sir.

    #278259

    See if that works…

    That’s a really beautiful job there sir!

    #278276
    aa_custom
    Pro
    PIttsburgh, PA

    Thanks guys. I just sent out a bid for another small one, I’ll post photos if I land it.

    #278355
    crotalusco
    Pro
    west bend, wi

    how have i missed this? Nice work there but I am partial to while on color. Looks good, as mentioned a solid surface top would have given it pop but looks great the way it is

    #278426
    Doobie
    Moderator

    Nice built-in.

    #278499
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    I don’t how I miss these good threads??? Beautiful job a² that is some nice work to be proud of.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #278584
    aa_custom
    Pro
    PIttsburgh, PA

    Thanks guys!



    @overanalyze
    I looked into that kem aqua, i think im gonna give it a go on my next one. It looks like you need an hvlp rig for it? Any recs on a good one to start out with?

    #278625

    Very cool @aa_custom ! Honestly I use this HF gun. I can get good results with it. You need a decent compressor for long term spraying.

    I just make sure to thin about 10% and always run the product through a mesh cone filter to make sure I don’t have any chunks in it.

    http://www.harborfreight.com/air-tools/paint/20-oz-professional-hvlp-gravity-feed-air-spray-gun-68843.html

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #278626

    @aa_custom I tried to post twice now and my reply isn’t there?? I use a Harbor Freight gun. It is their better one. It is about 50 bucks. Just need a good compressor. Reduce the product by about 10% and run through a mesh cone filter before spraying.

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #278632
    aa_custom
    Pro
    PIttsburgh, PA

    @aa_custom I tried to post twice now and my reply isn’t there?? I use a Harbor Freight gun. It is their better one. It is about 50 bucks. Just need a good compressor. Reduce the product by about 10% and run through a mesh cone filter before spraying.

    Seems like the site has been a bit buggy lately.

    Will that california air compressor I just bought handle it, or do I need a bigger tank, or more cfm?

    #278638

    @aa_custom I tried to post twice now and my reply isn’t there?? I use a Harbor Freight gun. It is their better one. It is about 50 bucks. Just need a good compressor. Reduce the product by about 10% and run through a mesh cone filter before spraying.

    Seems like the site has been a bit buggy lately.

    Will that california air compressor I just bought handle it, or do I need a bigger tank, or more cfm?

    I am not sure which one you bought, but if it is a smaller portable one, no. For small spray jobs you could add a second tank for added capacity.

    Otherwise look at Fuji HVLP setups. They are self contained units. They get very good ratings and aren’t super expensive. There is a thread floating around here where someone bought one and really liked it.

    Andrew

    A Working Pro since 1995!

    Member since March 26, 2014.

    #278641
    aa_custom
    Pro
    PIttsburgh, PA

    Its a small 4.6 gal twin tank unit.

    I’ll look into the fuji units too. Thanks.

    #278643
    aa_custom
    Pro
    PIttsburgh, PA

    HOLY CRAP I just looked up fuji ones, and they sell ones made for SPRAYING HUMANS with tanning spray! Thats hilarious!

    http://thetanningstore.com/Fuji-hvlp-TAN-LITE-Spray-Tan-System-Demo.html?utm_source=google-shopping&utm_medium=organic&gclid=CjwKEAiA9qCnBRCb7ZDhvaHSyicSJABGFFHtwhnr0JeSKm7-C94Sr_lYkmxeLokwY9WXuFK_a_byChoCnYHw_wcB

    I’m just gonna get that and go into business making oompa loompas

    #279027
    mjreich
    Pro
    Coon Rapids, MN

    Cool project. I have some built ins around my fireplace in my walkout basement. I need to replace them. I like to see how other people have done it for inspiration. Good work Sir.

    Do you plan on replacing them soon?

Viewing 14 posts - 41 through 54 (of 54 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.559 seconds