dcsimg

Bosch brute cases

This topic contains 105 replies, has 23 voices, and was last updated by  ChadM 4 years, 7 months ago.

Viewing 20 posts - 41 through 60 (of 106 total)
  • Author
    Posts
  • #276264

    theamcguy
    Pro
    Fayetteville, NC

    I would like to have a case dedicated for 12″ sawzall blades

    Maybe an L-Boxx 3D with the sawzall in the box and one of the drawers dedicated to the 12″ blades.

    Automotive Pro
    Fayetteville, NC

    #276589

    Nyx
    Pro
    Pittsburgh, PA

    I would like to have a case dedicated for 12″ sawzall blades

    So like how many blades would you expect to store in a case?

    #276597

    crotalusco
    Pro
    west bend, wi

    I would think a good brute case would be even more important since they ship the recip in a bag. Digging out loose blades from the bag cant be fun

    #277572

    Nyx
    Pro
    Pittsburgh, PA

    My DeWalt recip comes in a hard plastic box and most of my blades are in a clear plastic smaller case inside with the recip saw.

    #277804

    I would like to have a case dedicated for 12″ sawzall blades

    Would a tool roll be another alternative or do you still prefer a case?

    John S

    #277879

    theamcguy
    Pro
    Fayetteville, NC

    Would a tool roll be another alternative or do you still prefer a case?

    I have some tool rolls and just don’t like them. They take up too much unrolled and rolled up they are inconvenient.

    Automotive Pro
    Fayetteville, NC

    #277967

    Nyx
    Pro
    Pittsburgh, PA

    Would a tool roll be another alternative or do you still prefer a case?

    I have some tool rolls and just don’t like them. They take up too much unrolled and rolled up they are inconvenient.

    Tool rolls?

    #278022

    Would a tool roll be another alternative or do you still prefer a case?

    I have some tool rolls and just don’t like them. They take up too much unrolled and rolled up they are inconvenient.

    Tool rolls?

    There are all sort of canvas tool rolls –
    http://www.amazon.com/Bucket-Boss-Brand-07004-Duckwear/dp/B00004T82P
    probably most commonly used for a set of wrenches or chisels or pliers set…
    http://www.amazon.com/Channellock-TOOLROLL-3-5-Piece-Plier-Handy/dp/B001A3ZBCI/

    (This Bosch cloth bag for recip blades is why I asked – http://www.amazon.com/Purpose-Recip-Blade-10-Piece-RAP10PK/dp/B00P84OAQ8 )

    John S

    #278089

    crotalusco
    Pro
    west bend, wi

    its not so fun trying to slide saw blades into pockets then expect them to hold up. A longer maybe wider brute case is the way to go if we can get one

    #278237

    Toolshead
    Pro
    In the Rice Fields, South TX

    <P>I would like to have a case dedicated for 12″ sawzall blades</P>

    <P>Would a tool roll be another alternative or do you still prefer a case?</P>

    A case would be preferred. I’d find a way to bend the roll. I suspect the teeth would snag, too.

    #279456

    Nyx
    Pro
    Pittsburgh, PA

    Would a tool roll be another alternative or do you still prefer a case?

    I have some tool rolls and just don’t like them. They take up too much unrolled and rolled up they are inconvenient.

    Tool rolls?

    There are all sort of canvas tool rolls –

    http://www.amazon.com/Bucket-Boss-Brand-07004-Duckwear/dp/B00004T82P

    probably most commonly used for a set of wrenches or chisels or pliers set…

    http://www.amazon.com/Channellock-TOOLROLL-3-5-Piece-Plier-Handy/dp/B001A3ZBCI/

    (This Bosch cloth bag for recip blades is why I asked – http://www.amazon.com/Purpose-Recip-Blade-10-Piece-RAP10PK/dp/B00P84OAQ8 )

    Ah yeah. I think I’d prefer a box or bin for most things rather than this tool bag er.. Roll.

    #279542

    thedude306
    Moderator
    Foam Lake, SK

    Is anybody doing anything to label these cases better. Some of mine have embossed logos on the red ends but it’s hard to see.

    Brad T
    Self employed Pro since 2014!!

    #279556

    I’m still hoping for the same thing. My stupid Dyno label maker labels keep peeling off. I have the small hand held one with the thick plastic labels.

    #279613

    KenW
    Pro

    Is anybody doing anything to label these cases better. Some of mine have embossed logos on the red ends but it’s hard to see.

    You might try affixing metal label holders similar to many file cabinets. Allow you to change the label as you would need or want.

    #279621

    thedude306
    Moderator
    Foam Lake, SK

    that’s a great idea. I think they can be riveted on.

    It amazes me how such a small thing is missed on all the l-boxxes, brute case etc.

    Brad T
    Self employed Pro since 2014!!

    #279668

    crotalusco
    Pro
    west bend, wi

    Ya i agree some good form of labeling would be nice. As i am building a collection of these I will have to use a paint marker or something

    #279731

    y stupid Dyno label maker labels keep peeling off

    Oh no – I was hoping to get this guy and start labeling away since my tape + notecards is fine temporarily…
    http://www.amazon.com/Epson-LabelWorks-LW-300-Label-Maker/dp/B005J7Y6HW

    John S

    #280098

    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    There are all sort of canvas tool rolls –

    http://www.amazon.com/Bucket-Boss-Brand-07004-Duckwear/dp/B00004T82P

    probably most commonly used for a set of wrenches or chisels or pliers set…

    http://www.amazon.com/Channellock-TOOLROLL-3-5-Piece-Plier-Handy/dp/B001A3ZBCI/

    (This Bosch cloth bag for recip blades is why I asked – http://www.amazon.com/Purpose-Recip-Blade-10-Piece-RAP10PK/dp/B00P84OAQ8 )

    OH OK thank for the link, I need some roll ups for my chisels and of sorts.

    Dirty

    A Working Pro since 1988!

    Member since January 26, 2013.

    #280156

    theamcguy
    Pro
    Fayetteville, NC

    I’m still hoping for the same thing. My stupid Dyno label maker labels keep peeling off. I have the small hand held one with the thick plastic labels.

    The new labelers like John S. linked to above have better adhesive on their labels. I have a similar label maker from Brother and have never had a label fall off or lose adhesion.

    Automotive Pro
    Fayetteville, NC

    #280414

    I’m still hoping for the same thing. My stupid Dyno label maker labels keep peeling off. I have the small hand held one with the thick plastic labels.

    The new labelers like John S. linked to above have better adhesive on their labels. I have a similar label maker from Brother and have never had a label fall off or lose adhesion.

    I have a Brothers P-Touch and the labels are great. I remember the old Dymo label makers adhesive giving out after a while. These were the ones which emboss the letters from behind. Haven’t had a current Dymo one though.

    P-Touch is great. I don’t have a need to look at anything else.

Viewing 20 posts - 41 through 60 (of 106 total)

You must be logged in to reply to this topic.

queries. 0.721 seconds