dcsimg

Austin's spring/summer 2016 project.

Viewing 20 posts - 61 through 80 (of 241 total)
  • Author
    Posts
  • #512727
    58Chev
    Pro
    Etobicoke, ON

    They started the hardwood today it’s a pretty cool looking wood I forgot what they said what type it is.

    The one strip of Floor up against the wall looks good Austin.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #512930
    r-ice
    Pro
    Durham region, ON

    They started the hardwood today it’s a pretty cool looking wood I forgot what they said what type it is.

    is that the back side, why is there so much writing on it? what type of flooring is it regular hardwood?

    #512938
    RonW
    Moderator
    Holladay, Tn

    They started the hardwood today it’s a pretty cool looking wood I forgot what they said what type it is.

    is that the back side, why is there so much writing on it? what type of flooring is it regular hardwood?

    That’s the underlayment. Looks like they just have the starter run down in the pic.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #512949
    Austin
    Pro
    Covington, KY

    Yeah ron is right that is just felt paper, there is only the starter row down. Its regular hardwood.

    #512954
    theamcguy
    Pro
    Fayetteville, NC

    Floor looks great. This will be a very nice place once finished.

    Automotive Pro
    Fayetteville, NC

    #513009
    Austin
    Pro
    Covington, KY

    Had to stop today to let the hardwood guy in. Got a better picture of it. It’s walnut.

    #513023
    theamcguy
    Pro
    Fayetteville, NC

    Had to stop today to let the hardwood guy in. Got a better picture of it. It’s walnut.

    Wow that is some nice flooring right there.

    Automotive Pro
    Fayetteville, NC

    #513030
    RonW
    Moderator
    Holladay, Tn

    Had to stop today to let the hardwood guy in. Got a better picture of it. It’s walnut.

    Man that’s going to be a good looking floor.

    Ron

    A Working Pro since 1994!

    Member since March 26, 2014.

    #513038
    Austin
    Pro
    Covington, KY

    The front entry will be really cool it’s going to be haringbone with a border.

    #513052
    58Chev
    Pro
    Etobicoke, ON

    Had to stop today to let the hardwood guy in. Got a better picture of it. It’s walnut.

    Austin,
    Walnut will be nice for the flooring.
    What is the width of it?

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

    #513473

    The front entry will be really cool it’s going to be haringbone with a border.

    That will be beautiful when it’s all done. Can’t wait to see some pictures.

    #517792
    Austin
    Pro
    Covington, KY

    Got some of the crown up in the main room. It stinks because the longest pieces we can fit in the elevator are 12′ so that means a lot of scarf joints

    #517873
    roninohio
    Pro
    New Franklin, OH

    The walnut should look beautiful when done. Looks like some wide planks? Must have a good budget to use walnut.

    #517882
    BeardedCarpenter
    Pro
    Winsted, CT

    It’s not everyday you see walnut flooring, should look great.

    #517930
    Austin
    Pro
    Covington, KY

    The walnut should look beautiful when done. Looks like some wide planks? Must have a good budget to use walnut.

    The budget, is more than good, its ridiculous.

    It’s not everyday you see walnut flooring, should look great.

    first job I have done with walnut flooring

    #517937

    Crown looks so nice on large ceilings. Place is going to be incredible when you are done

    #518004
    Clev08
    Pro

    @Austin what is the width of the flooring? @58Chev asked and I am also curious. It’s tough to tell if it is really wide or if the picture was taken close up.

    #518114
    theamcguy
    Pro
    Fayetteville, NC

    Got some of the crown up in the main room. It stinks because the longest pieces we can fit in the elevator are 12′ so that means a lot of scarf joints

    Still it came out pretty nice.

    Automotive Pro
    Fayetteville, NC

    #518118
    r-ice
    Pro
    Durham region, ON

    Yeah ron is right that is just felt paper, there is only the starter row down. Its regular hardwood.

    ahh gotcha, i was thinking to myself that is some fancy modern looking like hardwood, reminds me of those really fancy offices that choose black and red stripes for the floor.

    #518543
    58Chev
    Pro
    Etobicoke, ON

    Got some of the crown up in the main room. It stinks because the longest pieces we can fit in the elevator are 12′ so that means a lot of scarf joints



    @Austin
    ,
    Looks great, nice crown molding. Keep the updates coming.

    “If you don’t pass on the knowledge you have to others, it Dies with you”
    — Glenn Botting

Viewing 20 posts - 61 through 80 (of 241 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.715 seconds