dcsimg

Anvil stand build

Viewing 20 posts - 61 through 80 (of 82 total)
  • Author
    Posts
  • #705749
    theamcguy
    Pro
    Fayetteville, NC

    Thanks. I just use a brush when painting. I use two coats of hammerite paint.

    That Hammerite paint really flows out nicely and gives a good finish that hides marks later on. Very nice work.

    Automotive Pro
    Fayetteville, NC

    #705750
    Rovik
    Pro
    #705868
    Rovik
    Pro

    Thanks. I just use a brush when painting. I use two coats of hammerite paint.

    That Hammerite paint really flows out nicely and gives a good finish that hides marks later on. Very nice work.

    I like Hammerite paint a lot. I especially like the version with hammered finish. Hides grinding marks and so on. Handles beating very well after painting.

    Norway

    #705976

    Here is the finished product. Very happy about it 🙂
    I have also made a video on youtube: https://youtu.be/uK4HL9v1j84

    Really nice work Ivan looks great nice weld’s. So the anvil is bolted down you drilled and tapped into the bottom ?
    Good music in the video 👍💪

    #706018
    GTokley
    Pro
    Belleville, ON

    Here is the finished product. Very happy about it 🙂
    I have also made a video on youtube: https://youtu.be/uK4HL9v1j84

    Very nice! You should be very happy. It turned out great. Like the video too.

    Greg
    Do More of What Makes You Happy

    #706049
    Rovik
    Pro

    @Boschmanbrian, the anvil is bolted down on the stand. I just drilled and tapped into the bottom. Works great.

    Norway

    #706059
    theamcguy
    Pro
    Fayetteville, NC

    Here is the finished product. Very happy about it

    Ivan the stand came out very nice. I also enjoyed the video.

    Automotive Pro
    Fayetteville, NC

    #706066
    Rovik
    Pro

    Thanks guys 😁

    Norway

    #706072
    smallerstick
    Pro
    North Bay, ON

    Thanks guys 😁

    I just watched the video, too, very nicely done.

    Can’t wait for the next project!

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #706075
    Rovik
    Pro

    Thanks guys 😁

    I just watched the video, too, very nicely done.

    Can’t wait for the next project!

    Thanks. Next on my list is a diy 2×72 belt grinder.

    It’s getting cold in Norway. I had to escape to Gran Canaria for a vacation 🤪

    Norway

    #706087

    @boschmanbrian, the anvil is bolted down on the stand. I just drilled and tapped into the bottom. Works great.

    Good idea. I thought I saw it in the video.
    Was it hard to drill into the anvil

    Gran canaria 😮😲🥳👍 enjoy it Ivan

    #706097
    Rovik
    Pro

    @boschmanbrian, the anvil is bolted down on the stand. I just drilled and tapped into the bottom. Works great.

    Good idea. I thought I saw it in the video.
    Was it hard to drill into the anvil

    Gran canaria 😮😲🥳👍 enjoy it Ivan

    Felt like the same as the stand.

    Norway

    #706116
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    @boschmanbrian, the anvil is bolted down on the stand. I just drilled and tapped into the bottom. Works great.

    Good idea. I thought I saw it in the video.
    Was it hard to drill into the anvil

    Gran canaria 😮😲🥳👍 enjoy it Ivan

    Felt like the same as the stand.

    Well that project came out superb !!. Have a good time in Spain. It’s a place I’d love to visit.

    #706123

    @boschmanbrian, the anvil is bolted down on the stand. I just drilled and tapped into the bottom. Works great.

    Good idea. I thought I saw it in the video.
    Was it hard to drill into the anvil

    Gran canaria 😮😲🥳👍 enjoy it Ivan

    Felt like the same as the stand.

    Okay so it’s not hardened any more than the steel used for the stand.
    Just thought it would be hardened because of the 🔨 ing on it.

    #706157
    Rovik
    Pro

    @Boschmanbrian, i just used a new sharp drillbit. I don’t think the bace of the anvil is hardened.

    Norway

    #706171
    smallerstick
    Pro
    North Bay, ON

    Thanks. Next on my list is a diy 2×72 belt grinder.

    It’s getting cold in Norway. I had to escape to Gran Canaria for a vacation

    Really looking forward to that build. Have a great vacation!

    BE the change you want to see.
    Even if you can’t Be The Pro… Be The Poster you’d want to read.

    #706181
    Rovik
    Pro

    Thanks. Next on my list is a diy 2×72 belt grinder.

    It’s getting cold in Norway. I had to escape to Gran Canaria for a vacation

    Really looking forward to that build. Have a great vacation!

    Thanks. I will make a separate build thread when i start.

    Norway

    #706228
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Thanks. Next on my list is a diy 2×72 belt grinder.

    It’s getting cold in Norway. I had to escape to Gran Canaria for a vacation

    Really looking forward to that build. Have a great vacation!

    Thanks. I will make a separate build thread when i start.

    Maybe some pics of that island off of Spain???

    #706305
    Rovik
    Pro

    Thanks. Next on my list is a diy 2×72 belt grinder.

    It’s getting cold in Norway. I had to escape to Gran Canaria for a vacation

    Really looking forward to that build. Have a great vacation!

    Thanks. I will make a separate build thread when i start.

    Maybe some pics of that island off of Spain???

    Her you go:

    Norway

    #706355
    DirtyWhiteBoy
    Pro
    Honolulu,, Hi.

    Looks really nice there It must be warm for you from Norway,, Spain it way north from me and I bet it’s very cool there for me.

Viewing 20 posts - 61 through 80 (of 82 total)
  • You must be logged in to reply to this topic.
© Robert Bosch Tool Corporation 2014, all rights reserved.
queries. 0.228 seconds