Tagged: work shop
November 23, 2012 at 11:09 am #7498
I have a basement shop 16′ x 36′ x 8′. If I had my druthers I’d build a barn with lots of windows and drive in access to my shop! Where is your shop?~ Rob at http://www.ConcordCarpenter.comNovember 28, 2012 at 7:00 am #8519
Mine is on the 2nd floor above my garage. I too hope to one day build a large barn. The key is having really good access for loading materials and removing finished projects.November 28, 2012 at 8:43 am #8521
That’s funny. Every guy I know would love a barn or large outbuilding. “A man town of tools”
Is your shop mostly woodworking or geared to other trades? How do you heat it?
I’m hoping to get the BTP folks to allow posting of pictures. If they do I’d love to get folks to post photos of their shops.~ Rob at http://www.ConcordCarpenter.comNovember 28, 2012 at 9:08 am #8523
Mine’s in a converted 2-car garage. Still in the process of adding a new garage, but the important thing is that my tools are nice and dry. My truck, however, sits in the elements. I’m good with that. And even though it’s a large space, I could still use more!November 28, 2012 at 2:05 pm #8667
2+ garage, unheated. All of my big tools are on wheels so I can roll them out of the way to get at least one car in there. I’m slowly insulating it so I can add a vented NG heater.
I want a big barn too. One side for working on vehicles (with a hoist) and the other for woodworking. For now I’ll settle for heat and a shed to put all the lawn and garden stuff into.
Rob, I think we can attach images to posts up to 1000 KB in size (just above the post button).November 28, 2012 at 9:42 pm #8709
Jeff – that’s new today and was a result of a suggestion. BTP is still fine tuning everything and are very open to feedback. Thanks for pointing that out ~ I totally missed it. ROB~ Rob at http://www.ConcordCarpenter.comNovember 28, 2012 at 9:42 pm #8710
Jeff – that’s new today and was a result of a suggestion. BTP is still fine tuning everything and are very open to feedback. Thanks for pointing that out ~ I totally missed it. ROB~ Rob at http://www.ConcordCarpenter.comNovember 29, 2012 at 8:07 pm #8733
I have 2 shops My one shop is in the house and it is 16 ft x 16 ft. I use it mainly in the winter and my second shop is two storey with 1600 sq ft . Both are fully equipped with woodworking tools .
Attachments:December 3, 2012 at 5:35 pm #9065
In my garage 24 x 24 right now it mainly to keep supplies and tools organized. I am working on turning into a shop I can use its going to take time and money. I have a couple of diseases which cost me a lot to stay healthy so my shop comes last after my wife and kids. I would give anything to work from my shop. But as for now I keep plugging away as a mobile carpenter.December 4, 2012 at 9:05 pm #9130
John ~ I’m officially jealous. I have a basement shop and would KILL to get a ground level / daylight shop.
I also work out of a 6×10 trailer and recently “pimped it out” See link: http://www.aconcordcarpenter.com/2012/10/bosch-click-and-go-system.html~ Rob at http://www.ConcordCarpenter.comDecember 5, 2012 at 8:37 pm #9203
Thanks Robert ! I gave my main shop a makeover in the summer this year . It didn,t look too good before . It had cheap ugly siding and i also added a 12 x 16 cedar deck on the end of the building coming off the second floor .
Attachments:December 6, 2012 at 12:50 pm #9215
Had a 2 car garage, closed one in when we needed an extra room and said what the heck, we never put the car in anyway so that became my work shop.
went out and got lots of cabinets, built a new work bench and best of all since the boiler room is off the garage it keeps about 62 degrees even on the coldest days.
installed a great air filter system and spend lots of time thereduring the winter.December 6, 2012 at 5:47 pm #9247
I went from a 24′ x 28′ down to a 16’x18′, after moving. Talk about cramped for space, but can we ever really have one big enough?December 17, 2012 at 7:29 pm #9824
John – I like those birdhouses. Are the paintings on your shop murals or are they posters? Tough to see in the pic~ Rob at http://www.ConcordCarpenter.comDecember 17, 2012 at 8:11 pm #9829
Thanks Robert . The posters are made with a aluminum backing. They are made to last a long time .I send them the pictures and they print them off .December 18, 2012 at 8:46 am #9863
Mark you are absolulely right. I’ve never head someone say that they wish their workshop was smaller.January 3, 2013 at 9:54 am #10232
My workshop is an old shed,barn that I renovated. I was able to make it completely to my specifications and was able to try different techniques and use it as a mini experiment.January 8, 2013 at 12:44 pm #10405
I would love to have the ultimate workshop. I currently work out of my oversized garage, but have plans for a larger place. I have lots of tools and equipment so I am excited to finally have a custom place for all my stuff.January 13, 2013 at 7:28 am #10583
Alum? Wow very innovative and resistant to the weather too. Good choice!~ Rob at http://www.ConcordCarpenter.comJanuary 22, 2013 at 3:49 pm #11084
I have a woodshop in the basement, and a shop in the garage for mechanical work. I need better dust control for the basement shop !!
You must login or register for the Pro Forum to reply to this topic.
No related posts.